Door & Switch Assy Replacement - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Door & Switch Assy Replacement Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LSE7806ACE	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

ruselmyr		#1 Posted : Monday, August 18, 2008 4:03:19 AM(UTC)
Rank: Member Groups: Registered Joined: 8/18/2008(UTC) Posts: 4		Hello, I'm unsure how old it is, Is there an easy way to place the door & switch assy. I've done it before, the switch is not problem it's the wire from the right rear to the left rear. Do I remove the white plastic top of the drum assy? Or just tough it out? Thanks for any and all help


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Monday, August 18, 2008 6:59:27 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Are you talking about the washer or the dryer? Here are the break down diagrams for the Maytag laundry center Model LSE7806ACE Gene.


User Profile View All Posts by User View Thanks

ruselmyr		#3 Posted : Tuesday, August 19, 2008 6:41:30 AM(UTC)
Rank: Member Groups: Registered Joined: 8/18/2008(UTC) Posts: 4		It's the washer. Door switch mounted in right rear corner with the wire running along the back to the left rear side. Don


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, August 19, 2008 12:47:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Don, I'm afraid I did not understand your question. What is wrong with your washer? Can you refer to diagrams part##? Gene.


User Profile View All Posts by User View Thanks

ruselmyr		#5 Posted : Tuesday, August 19, 2008 1:20:55 PM(UTC)
Rank: Member Groups: Registered Joined: 8/18/2008(UTC) Posts: 4		Good afternoon, I need to replace the door switch part #AP204694 (12001514) Switch assembly with fuse. It is mounted on the right rear, the wire slips into a conduit or track to keep it out of the way of the washer drum and runs to the left rear where it plugs into the wiring harness. I'm not sure how a tech would do it. How hard it is to take the top cover off.


User Profile View All Posts by User View Thanks

Gene		#6 Posted : Tuesday, August 19, 2008 2:19:21 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the washer front panel. Pull the washer off of the stand. Now you can remove the top panel and access the switch assembly and the wire harness. Gene.


User Profile View All Posts by User View Thanks

ruselmyr		#7 Posted : Thursday, August 21, 2008 4:45:57 AM(UTC)
Rank: Member Groups: Registered Joined: 8/18/2008(UTC) Posts: 4		Thank you Gene, Part is arriving via UPS today, I'll install it tonight.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close