Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

30 Pages«<34567>»
Options
Go to last post Go to first unread
Gene  
#41 Posted : Monday, July 21, 2008 5:28:00 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Keep us posted.

Gene.
RocketRepair  
#42 Posted : Saturday, August 2, 2008 7:44:36 PM(UTC)
RocketRepair

Rank: Member

Groups: Registered
Joined: 8/2/2008(UTC)
Posts: 1

Model:GSL25JFRF BS
Serial:GH217579
Is this one covered for a mother board replacement?
What do you do when no service and repair manual is available?
Gene  
#43 Posted : Monday, August 4, 2008 12:47:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi RocketRepair,

What exactly is wrong with your refrigerator?

Gene.
bristol  
#44 Posted : Tuesday, August 5, 2008 5:47:54 AM(UTC)
bristol

Rank: Member

Groups: Registered
Joined: 8/5/2008(UTC)
Posts: 1

Model: GE PFS22SBSBSS Serial #: AL059537 Purchased 04/2006
Control Board: GECP DOM - EBX1069P005 WKKT Model No.: 0158-04-03
GEA Part No.: 200D4860G015

I have a problem similar to dokken. Condensor fan spins slowly or not at all. Measured 13.5 VDC at pin 8 on J2 and 4 VDC at pin 5 on J2. Unplugged fan and pin 5 went to 13.5 VDC. Cooled condensor with external fan and pin 2 dropped slowly from 0.4 VDC to 0.0 VDC after condensor shut off. Voltage at pin 4 (evap motor) at 10.15 VDC also dropped slowly to 0.0 VDC after condensor shut off. I called GE consumer relations (800 386 1215) and after navigating through their system, I was told that there would be no cost for service call and board replacement.
seveneven  
#45 Posted : Thursday, August 21, 2008 1:48:43 PM(UTC)
seveneven

Rank: Member

Groups: Registered
Joined: 8/21/2008(UTC)
Posts: 6

Hi there, I found this forum last night after my fridge started clicking every five seconds and warming up. :(

The building I live in is not yet two years old (same goes for the appliances). This morning when I spoke with the building manager to see if anyone else had the same issue, she said that hers started clicking a few weeks ago. The problem (just like this forum suggests) was the control board, which needed to be replaced at a cost of about $300.

Abadfish66, if you are still out there, could you tell me if my board would be covered under warranty, or what the replacement part number would be? (Model: GDS20KBSBBB)

Also, what does one need to say, or who should one talk to in order to get this warranty??
abadfish66  
#46 Posted : Thursday, August 21, 2008 1:59:50 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

Seveneven...Your board is covered and will be replaced free of charge as long as it's under 3 years old. Just call GE at 1-800-432-2737 and schedule a repair, let them know it is a no cool refer and they will get someone there asap. No need to mention anything to them about any thing other than that. The call takers do not have the info I do, but the service tech that comes out will, so you are good to go. Hope that helps.
abadfish66  
#47 Posted : Thursday, August 21, 2008 2:01:49 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

Not sure about your building managers refer. If hers did not fall under the model# and serial# range then she got charged correctly.
seveneven  
#48 Posted : Thursday, August 21, 2008 2:13:53 PM(UTC)
seveneven

Rank: Member

Groups: Registered
Joined: 8/21/2008(UTC)
Posts: 6

Abadfish66...thanks for the fast response!

I'm in Canada - will that exclude me from warranty coverage? My building manager contacted Mabe at 1-800-361-3400 (which was the contact info listed on the refer manual). If I contact GE directly using the number you listed, will I stand a better chance?
abadfish66  
#49 Posted : Thursday, August 21, 2008 2:47:08 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

I don't know how that would work, all the warranty info says for the United States only and all I have is based in the USA. Don't you guys up there use 240 volts to run refrigerators there? I know GE manufactures refers for Canada, and they are 240 volts.
seveneven  
#50 Posted : Thursday, August 21, 2008 3:09:04 PM(UTC)
seveneven

Rank: Member

Groups: Registered
Joined: 8/21/2008(UTC)
Posts: 6

Hmmm...well the fridge I've got is 120V. Maybe 240V is used for older buildings?

I guess that I will contact GE Canada and see what they say...thanks for your help! If you come across any warranty lists for Canada, let me know... :)
Users browsing this topic
Guest (7)
30 Pages«<34567>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.