Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
LLIN0321  
#1 Posted : Sunday, July 20, 2008 2:22:20 PM(UTC)
LLIN0321

Rank: Member

Groups: Registered
Joined: 7/20/2008(UTC)
Posts: 4

Hello,

Bellow was broken and I fixed it. Machine was working great before. While putting the machine back together the user interface fell down and broke a wire on the end of the ribbon in half. I put it back together but it wouldn't light up right or respond to any command. There is only one horizontal light and no codes . To resolve this problem do I put in a New User interface?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, July 21, 2008 1:46:18 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The ribbon is not repairable and you have to replace the user interface to fix the washer.

- The part number for the user interface is AP3128748

Here are the break down diagrams for the Whirlpool Duet washer Model GHW9200LW0

Gene.
LLIN0321  
#3 Posted : Wednesday, July 23, 2008 4:37:24 PM(UTC)
LLIN0321

Rank: Member

Groups: Registered
Joined: 7/20/2008(UTC)
Posts: 4

Originally Posted by: Gene Go to Quoted Post
The ribbon is not repairable and you have to replace the user interface to fix the washer.

- The part number for the user interface is AP3128748

Here are the break down diagrams for the Whirlpool Duet washer Model GHW9200LW0

Gene.

Hi Gene,
Changed interface. Control locked light on, silk light flashing, 26sec showing and other lights on. Tryed other buttons and turning wash cycle switch no response. Hit cancel/ pause button all lights out and control locked light on, all other lights out. If I press control on and pause/cancel buttons together the above comes back on. Does this mean the CCU is bad?
Gene  
#4 Posted : Wednesday, July 23, 2008 5:26:09 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Push and hold the "End of cycle Signal" button for 3 seconds or until it unlocks.

Gene.
LLIN0321  
#5 Posted : Thursday, July 24, 2008 10:07:42 AM(UTC)
LLIN0321

Rank: Member

Groups: Registered
Joined: 7/20/2008(UTC)
Posts: 4

Originally Posted by: Gene Go to Quoted Post
Push and hold the "End of cycle Signal" button for 3 seconds or until it unlocks.

Gene.

Honorable Gene,

YOU'RE THE MAN!!! Thats it, Works Great! Sincerely, Thank You!
Lou
Gene  
#6 Posted : Thursday, July 24, 2008 7:29:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You're welcome.

Gene.
Users browsing this topic
Guest (5)
Similar Topics
Whirlpool duet washer front load (Washer Repair)
by Guest 6/3/2024 9:57:09 AM(UTC)
Whirlpool Duet Sport wgd8300sw0 - drying time takes forever (Dryer Repair)
by mattyP4321 5/14/2024 8:34:23 AM(UTC)
Whirlpool Duet MDL# WWF8400TW02 New Drain Pump (Washer Repair)
by 1Oskydoodle! 3/30/2024 10:30:29 AM(UTC)
Whirlpool Duet Washer - Possible Faulty Fill Valve (Washer Repair)
by Guest 2/2/2024 4:18:21 PM(UTC)
Whirlpool Duet front load washer model WFW8300SW02 (Washer Repair)
by Guest 12/4/2023 8:39:10 AM(UTC)
Whirlpool Duet electric dryer model WED8300SW1 (Dryer Repair)
by Guest 9/9/2023 9:26:30 AM(UTC)
Whirlpool Duet NG Dryer gas smell when off and open door (Dryer Repair)
by Guest 5/16/2023 4:02:36 AM(UTC)
Whirlpool Duet Electric dryer - no heat (Dryer Repair)
by ShawnDS24 2/25/2023 9:08:24 AM(UTC)
Whirlpool Duet dryer WGD9400 knob Removal (Washer Repair)
by Guest 1/1/2023 8:41:47 AM(UTC)
Whirlpool duet clothes washer (Washer Repair)
by DThiessen 9/28/2022 10:08:52 AM(UTC)
Whirlpool Duet YWED7500VW2 (Dryer Repair)
by Guest 6/14/2022 11:19:46 AM(UTC)
Whirlpool Duet intermittent spinning (Dryer Repair)
by wadeburt 5/17/2022 6:31:21 AM(UTC)
Whirlpool Duet F06 error -- seeking input (Washer Repair)
by TexPat60 2/21/2022 8:25:46 PM(UTC)
Whirlpool Duet ghw9300pw4 has power but no start (Washer Repair)
by 5150 2/18/2022 7:16:37 PM(UTC)
Whirlpool duet washer not draining (Washer Repair)
by Guest 2/16/2022 8:40:23 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.