Dryer only heating on low setting - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Dryer only heating on low setting Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FEX831CSO	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

doubledog		#1 Posted : Monday, September 20, 2010 8:59:09 AM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2010(UTC) Posts: 1		My dryer is only heating in the low[delicate] setting, whether it is on low or high. Is it likely the switch itself is bad, or the heating element is only working at 1/2 capacity, or other ideas? Any help, thanks.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

bigger-hammer		#2 Posted : Monday, September 20, 2010 9:27:35 PM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2010(UTC) Posts: 7		Youre going to have to take the drum out and take a peek at the element. Probably the element has broken and is grounding out on the chassis giving you only a little bit of heat. Not enough of a short to blow the breaker. Another common one is a metal bra wire has worked its way through the holes of the drum and gets caught on the element shorting half of it out causing the same symptom.


User Profile View All Posts by User View Thanks

denman		#3 Posted : Tuesday, September 21, 2010 3:12:42 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for FRIGIDAIRE FEX831CS0 Frigidaire/laundry Center \| AppliancePartsPros.com Here is the wiring diagram http://manuals.frigidaire.com/prodinfo_pdf/Webster/1341356aelec_sheet_1.pdf Yes the Fabric Select switch could be shot (contacts welded together), this would keep the thermostat's heater always on and you will only get low heat. Unplu the unit and one side of the switch and check that it opens/closes with a meter.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close