Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Kitchenaid Superba ice maker not dumping ice
Options
Go to last post Go to first unread
Model: KSRP25FNBL00 Brand: Kitchen Aid Age: 1 - 5 years
Previous Topic Next Topic
Jamesdog  
#1 Posted : Wednesday, July 28, 2010 10:39:13 AM(UTC)
Jamesdog

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 5
Gene,

We have a KItchen Aid KSRP25FNBL00 That the ice is not working on. The tray fills with water however then the tray never dumps itself into the storage bin. Any ideas???


Thank you!!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, July 28, 2010 1:48:00 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a bad ice maker.

- The ice maker Part number: AP3182733
Back to top
Jamesdog  
#3 Posted : Wednesday, July 28, 2010 1:59:52 PM(UTC)
Jamesdog

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 5
gene,

Thanks for the response!! Is there a way to troubleshoot this and find out if it is fir sure the ice maker unit and not a relay or the optics?

Thank you again!!!
Back to top
Gene  
#4 Posted : Wednesday, July 28, 2010 2:14:04 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Open the freezer door. Close the flapper on the left side to clear the optic beam and watch the LED on the right side. If it stays on, there is nothing wrong with the optics.

Gene.
Back to top
Jamesdog  
#5 Posted : Wednesday, July 28, 2010 2:19:28 PM(UTC)
Jamesdog

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 5
I did as you suggested and if I close the flapper the led stays on, and if I cover the beam the led flashes.....
So if the ice maker unit the only other thing it can be?

Thanks again!!!
Back to top
Gene  
#6 Posted : Wednesday, July 28, 2010 2:32:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
James,

I understand your point. The ice maker is expensive, but there is nothing else left.

Gene.
Back to top
Jamesdog  
#7 Posted : Wednesday, July 28, 2010 2:43:21 PM(UTC)
Jamesdog

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 5
So there is nothing else in the "loop" that can be causing this issue other than the ice maker unit, am I correct?
Is replacement of the unit difficult??
Thanks again!!!
Back to top
Gene  
#8 Posted : Wednesday, July 28, 2010 2:48:25 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The instructions are attached to the reply.

Gene.
File Attachment(s):
In-door ice system - Removing the ice maker.doc (627kb) downloaded 60 time(s).
Back to top
Jamesdog  
#9 Posted : Wednesday, July 28, 2010 6:32:34 PM(UTC)
Jamesdog

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 5
Thanks so much for your help!! I will order the ice maker kit and see if that fixes it!!
Back to top
Gene  
#10 Posted : Wednesday, July 28, 2010 6:34:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Keep us posted.

Gene.
Back to top
Users browsing this topic
Guest (2)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET