lights come on/ no go - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

lights come on/ no go Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GLD2250RDC4	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

TomFan		#1 Posted : Tuesday, July 6, 2010 8:58:08 AM(UTC)
Rank: Member Groups: Registered Joined: 7/6/2010(UTC) Posts: 2		Hi guys ....having dishwaher probs....when you hit the wash button the light comes on......stays on for a bit (30s-min) than shuts off...dishwaher does nothing.....hoping it's not a control board prob....maybe just has to be reset(I hope).........Cheers :(


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Tuesday, July 6, 2010 12:26:28 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You may want to start the troubleshooting with checking the door switches (part of the door latch - #12 on the diagram). Make sure they are properly engaged when the door is latched. Here are the breakdown diagrams and Replacement parts for FRIGIDAIRE GLD2250RDC4 Frigidaire/dishwasher \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

TomFan		#3 Posted : Tuesday, July 6, 2010 6:04:38 PM(UTC)
Rank: Member Groups: Registered Joined: 7/6/2010(UTC) Posts: 2		Originally Posted by: Gene You may want to start the troubleshooting with checking the door switches (part of the door latch - #12 on the diagram). Make sure they are properly engaged when the door is latched. Here are the breakdown diagrams and Replacement parts for FRIGIDAIRE GLD2250RDC4 Frigidaire/dishwasher \| AppliancePartsPros.com Gene. I thought if the door switch was bad, I would'nt get any power to the board or panel etc.. I'm prob out to lunch with that idea ...I'll try to check that out...Thanks for the reply.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, July 6, 2010 6:22:26 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. If there is nothing wrong with the door switches, perform the Service test as instructed in the Tech sheet (page 2). Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close