Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
Dryer Tumbles but No Heat
Options
Go to last post Go to first unread
Model: FEQ1442ES0 Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
abadfish66  
#11 Posted : Thursday, June 5, 2008 11:57:28 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
You may have a loose connection at the terminal block at the dryer. Check the red and black wires to make sure they are screwed in tight
Back to top
cshirley  
#12 Posted : Thursday, June 5, 2008 12:05:59 PM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
Yeah, I've checked the voltage at the wall outlet and it measure 243V.
Back to top
cshirley  
#13 Posted : Thursday, June 5, 2008 12:07:30 PM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
I'm getting 243V coming into the dryer as well. I checked those wires and the white wire is attached to the case as it should be.
Back to top
cshirley  
#14 Posted : Thursday, June 5, 2008 12:08:59 PM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
I have also checked the heater relay switch on the control board and was getting voltage or resistance across it. I forgot to right it down but I remember it stayed the same no matter if I put the heat setting low. med, or high.
Back to top
abadfish66  
#15 Posted : Thursday, June 5, 2008 12:23:40 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Check this for me, go to the terminal block on the dryer, measure voltage from red to white, black to white, red to black and white to ground, post results
Back to top
cshirley  
#16 Posted : Thursday, June 5, 2008 12:31:05 PM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
Ok, I'm not at home but will be in about a hour and a half... 5PM Central. I'll check this then.

Curtis
Back to top
abadfish66  
#17 Posted : Thursday, June 5, 2008 1:46:42 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
If the voltages check out ok at the terminal block, go to the motor and with a screwdriver, work the centrifugal switch back and forth a few times with the dryer unplugged
Back to top
cshirley  
#18 Posted : Thursday, June 5, 2008 2:58:34 PM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
checked the terminal block and had 122V white + black, white + red, and 245V red + black

Also, I don't know what the centrifugal switch looks like but my grandparents who gave me the dryer say its still under a service warranty so I'm checking on that.
Back to top
Users browsing this topic
Similar Topics
Dryer Tumbles But No Heat (Dryer Repair)
by amarh725 11/13/2010 6:34:09 PM(UTC)
Whirlpool Washer-Dryer Tumbles but no heat (Dryer Repair)
by tedhayes 6/27/2009 2:34:42 PM(UTC)
gas dryer tumbles but no heat (Dryer Repair)
by coasty 5/20/2009 6:37:57 PM(UTC)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET