2 Pages<12 Go to Page...

Dryer Tumbles but No Heat Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: FEQ1442ES0	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

abadfish66		#11 Posted : Thursday, June 5, 2008 11:57:28 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		You may have a loose connection at the terminal block at the dryer. Check the red and black wires to make sure they are screwed in tight
User Profile View All Posts by User View Thanks

cshirley		#12 Posted : Thursday, June 5, 2008 12:05:59 PM(UTC)
Rank: Member Groups: Registered Joined: 6/5/2008(UTC) Posts: 9		Yeah, I've checked the voltage at the wall outlet and it measure 243V.
User Profile View All Posts by User View Thanks

cshirley		#13 Posted : Thursday, June 5, 2008 12:07:30 PM(UTC)
Rank: Member Groups: Registered Joined: 6/5/2008(UTC) Posts: 9		I'm getting 243V coming into the dryer as well. I checked those wires and the white wire is attached to the case as it should be.
User Profile View All Posts by User View Thanks

cshirley		#14 Posted : Thursday, June 5, 2008 12:08:59 PM(UTC)
Rank: Member Groups: Registered Joined: 6/5/2008(UTC) Posts: 9		I have also checked the heater relay switch on the control board and was getting voltage or resistance across it. I forgot to right it down but I remember it stayed the same no matter if I put the heat setting low. med, or high.
User Profile View All Posts by User View Thanks

abadfish66		#15 Posted : Thursday, June 5, 2008 12:23:40 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		Check this for me, go to the terminal block on the dryer, measure voltage from red to white, black to white, red to black and white to ground, post results
User Profile View All Posts by User View Thanks

cshirley		#16 Posted : Thursday, June 5, 2008 12:31:05 PM(UTC)
Rank: Member Groups: Registered Joined: 6/5/2008(UTC) Posts: 9		Ok, I'm not at home but will be in about a hour and a half... 5PM Central. I'll check this then. Curtis
User Profile View All Posts by User View Thanks

abadfish66		#17 Posted : Thursday, June 5, 2008 1:46:42 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		If the voltages check out ok at the terminal block, go to the motor and with a screwdriver, work the centrifugal switch back and forth a few times with the dryer unplugged
User Profile View All Posts by User View Thanks

cshirley		#18 Posted : Thursday, June 5, 2008 2:58:34 PM(UTC)
Rank: Member Groups: Registered Joined: 6/5/2008(UTC) Posts: 9		checked the terminal block and had 122V white + black, white + red, and 245V red + black Also, I don't know what the centrifugal switch looks like but my grandparents who gave me the dryer say its still under a service warranty so I'm checking on that.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

Similar Topics

Dryer Tumbles But No Heat (Dryer Repair) by amarh725 11/13/2010 6:34:09 PM(UTC)

Whirlpool Washer-Dryer Tumbles but no heat (Dryer Repair) by tedhayes 6/27/2009 2:34:42 PM(UTC)

gas dryer tumbles but no heat (Dryer Repair) by coasty 5/20/2009 6:37:57 PM(UTC)

2 Pages<12 Go to Page...