Whirlpool quiet partner iii does not heat water - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool quiet partner iii does not heat water Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GU2400XTPS7	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

aduttle		#1 Posted : Monday, April 26, 2010 3:07:31 PM(UTC)
Rank: Member Groups: Registered Joined: 8/18/2008(UTC) Posts: 5		my quiet partner iii dishwasher does not heat water for the wash cycle, what systems should I check to fix this. i did not see a thermostat or min heat sensor on the part number.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, April 28, 2010 2:18:39 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here is the parts breakdown Replacement parts for WHIRLPOOL GU2400XTPS7 Undercounter Dishwasher \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208572216.pdf Try the diagnostics. Then, I would check the heating element and the hi-limit thermostat with a meter for resistance, see the tech sheet. If OK Check the wires going up to the control board. If OK Check the thermistor for resistance.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

aduttle		#3 Posted : Monday, May 10, 2010 4:24:22 PM(UTC)
Rank: Member Groups: Registered Joined: 8/18/2008(UTC) Posts: 5		is that the same as the vent? pardon my ignorance, but UIdont see a thermistor in the parts diagram. :confused: Originally Posted by: denman Here is the parts breakdown Replacement parts for WHIRLPOOL GU2400XTPS7 Undercounter Dishwasher \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/d...0Sheet%20-%208572216.pdf Try the diagnostics. Then, I would check the heating element and the hi-limit thermostat with a meter for resistance, see the tech sheet. If OK Check the wires going up to the control board. If OK Check the thermistor for resistance.


User Profile View All Posts by User View Thanks

denman		#4 Posted : Monday, May 10, 2010 5:09:54 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		No it is different. Right hand side bottom of the diagram (blue boxes)
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (6)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close