9 Pages«<34567>» Go to Page...

No Dryer Heat Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LEN2000KQ1	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

nguyeko		#41 Posted : Friday, April 2, 2010 1:53:21 PM(UTC)
Rank: Member Groups: Registered Joined: 3/30/2010(UTC) Posts: 5		Yes! Check the timer terminals between black and red wires as well. It has continuity. I replaced the thermastats because I ordered it thinking the thermastats was the issue. Anyway, the dryer runs w/ the drummer rolls but still no heat. What could be the problem if those were not the issue? The timer seems to work as well. Korry- Originally Posted by: Gene Korry, Did you disconnect the wires from the parts before the continuity tests? If your answer is "Yes", then check for continuity between the timer terminals BK (black) and R (red) while the timer is in any auto or timed dry position. The wires should be removed from those terminals. Gene.
User Profile View All Posts by User View Thanks

Gene		#42 Posted : Monday, April 5, 2010 8:15:56 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: nguyeko Yes! Check the timer terminals between black and red wires as well. It has continuity. I replaced the thermastats because I ordered it thinking the thermastats was the issue. Anyway, the dryer runs w/ the drummer rolls but still no heat. What could be the problem if those were not the issue? The timer seems to work as well. Korry- Everything checks OK, but there is no heat... It can not be like that. Very likely something was wrong with the tests. You may want to start it from scratch. Gene.
User Profile View All Posts by User View Thanks

nguyeko		#43 Posted : Wednesday, April 7, 2010 5:56:41 PM(UTC)
Rank: Member Groups: Registered Joined: 3/30/2010(UTC) Posts: 5		Thanks Gene. It turned out the heating element is bad. There are 4 terminals in the vicinity. I was mistaken w/ the 2 other terminals. The heating element ONLY has one wire connected to its terminal. Anyway, after replaced the heating element, it works perfectly.Thanks again. Korry-
User Profile View All Posts by User View Thanks

qiqiangzhu		#44 Posted : Wednesday, April 7, 2010 6:52:10 PM(UTC)
Rank: Member Groups: Registered Joined: 4/7/2010(UTC) Posts: 17		Why you keep tell us check the voltage for 220v? Mine is a Whirlpool gas dryer, model # CG2951XYW3. From the manual, it uses 110v.
User Profile View All Posts by User View Thanks

Gene		#45 Posted : Wednesday, April 7, 2010 7:14:46 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: nguyeko Thanks Gene. It turned out the heating element is bad. There are 4 terminals in the vicinity. I was mistaken w/ the 2 other terminals. The heating element ONLY has one wire connected to its terminal. Anyway, after replaced the heating element, it works perfectly.Thanks again. Korry- Korry, I'm glad to hear you were able to fix it. Good job! Thank you for the feedback. Gene.
User Profile View All Posts by User View Thanks

Gene		#46 Posted : Wednesday, April 7, 2010 7:18:23 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: qiqiangzhu Why you keep tell us check the voltage for 220v? Mine is a Whirlpool gas dryer, model # CG2951XYW3. From the manual, it uses 110v. Did we tell you to check voltage for YOUR DRYER? It should be done for electric dryers only. What is wrong with your dryer? Gene.
User Profile View All Posts by User View Thanks

qiqiangzhu		#47 Posted : Wednesday, April 7, 2010 7:21:02 PM(UTC)
Rank: Member Groups: Registered Joined: 4/7/2010(UTC) Posts: 17		Originally Posted by: Gene Did we tell you to check voltage for YOUR DRYER? It should be done for electric dryers only. What is wrong with your dryer? Gene. No heat, sir. The drum is turning normally though. I will check continuity tomorrow and let you know the result. qiqiangzhu attached the following image(s):
User Profile View All Posts by User View Thanks

Gene		#48 Posted : Wednesday, April 7, 2010 7:25:48 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The first part you may want to check is the thermal fuse (#6 on the diagram). Here are the breakdown diagrams and Replacement parts for WHIRLPOOL CG2951XYW3 | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

qiqiangzhu		#49 Posted : Wednesday, April 7, 2010 7:28:14 PM(UTC)
Rank: Member Groups: Registered Joined: 4/7/2010(UTC) Posts: 17		Originally Posted by: Gene The first part you may want to check is the thermal fuse (#6 on the diagram). Here are the breakdown diagrams and Replacement parts for WHIRLPOOL CG2951XYW3 | AppliancePartsPros.com Gene. Where is it? On the right side above or left side bottom? File Attachment(s): DSCN2819a.jpg (367kb) downloaded 18 time(s).
User Profile View All Posts by User View Thanks

Gene		#50 Posted : Wednesday, April 7, 2010 11:27:57 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		It's on the left side bottom. The thermal fuse Part number: AP3132867 Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)

Similar Topics

No dryer heat (Dryer Repair) by adamson 8/9/2009 3:11:05 PM(UTC)

No Dryer Heat/No shut of in auto cycle (Dryer Repair) by fred2117 4/30/2009 2:09:57 AM(UTC)

No Dryer Heat (Dryer Repair) by jackd3 10/6/2007 5:06:10 AM(UTC)

9 Pages«<34567>» Go to Page...