kenmore washer not spining out all the time - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

kenmore washer not spining out all the time Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 11024832200	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

deadeye		#1 Posted : Saturday, March 29, 2008 4:33:23 PM(UTC)
Rank: Member Groups: Registered Joined: 3/29/2008(UTC) Posts: 2		My washer dosent always spinout at hi speed or it will not spin at all. If i move the drum with may hand and then put it on spin it will spin but not always at hi speed. I was guessing the brake but i couldnot find a post for my model to confirm this . Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Sunday, March 30, 2008 3:05:44 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Shine a lite in the spin basket and look for something stuck in the tub. If ok pull off the outer panel, remove the pump and motor and turn the tranny coupler clockwise till the spin basket starts to turn. If hard to turn with thumb and forefinger, you either have a busted filter under the tub, or dragging brake shoes. If bad shoes, check my brake shoe replacement article on page 3 of general talk section. Post results.


User Profile View All Posts by User View Thanks

deadeye		#3 Posted : Friday, April 4, 2008 6:56:09 PM(UTC)
Rank: Member Groups: Registered Joined: 3/29/2008(UTC) Posts: 2		I dont see the filter on the part list,to see what it looks like is this a lint filter, iam planing on working on the on sat. Just wanted to have a good picture of what iam looking for . Thanks for the info.


User Profile View All Posts by User View Thanks

richappy		#4 Posted : Friday, April 4, 2008 8:56:52 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		The filter is stuck to the bottom of the spin basket, a plastic comb shaped assembly that collects the lint and dumps it out on spin out. Sometimes they break and jam the bottom of the tub. You will need to pull the basket out to check.


User Profile View All Posts by User View Thanks

bambiblaster		#5 Posted : Saturday, April 5, 2008 5:54:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/4/2008(UTC) Posts: 116		Tip washer back... look on the left and right sides about 6 inches up do you see oil.. if so need gearcase and clutch


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close