Rank: Member
Groups: Registered
Joined: 1/29/2010(UTC)
Posts: 5
|
Please help to fix the door-front panel, where's the placement of spring handle; handle door; and lever door. I tried to do it myself but it's not right. Thanks a lot
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/29/2010(UTC)
Posts: 5
|
Thank you very much and appreciated. I knew is on page 20, number 4- 5. Unfortunately, i got it from justanswer.com, but i have to pay. sucks! But still. I'm having a problem with the spring handle, handle door and lever door i don't know the proper placement. i keep trying but it's not right. When i assemble and tested, there's a message dL, means door lock, not closed tightly.   Originally Posted by: sidfink43 
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
Well, sorry that did not give a complete answer, and without one of the machines in front of me I really cannot tell you what your problem is.
I may have on in the shop but will not be in there until Tuesday at the earliest, and if so I will try to look at it and take some pics.
Maybe someone else can chime in here to help.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/29/2010(UTC)
Posts: 5
|
well, thank you in advance. i hope you can help as early. I keep searching the answer of my problem. Originally Posted by: sidfink43 Well, sorry that did not give a complete answer, and without one of the machines in front of me I really cannot tell you what your problem is.
I may have on in the shop but will not be in there until Tuesday at the earliest, and if so I will try to look at it and take some pics.
Maybe someone else can chime in here to help.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/29/2010(UTC)
Posts: 5
|
 Originally Posted by: doran620 well, thank you in advance. i hope you can help as early. I keep searching the answer of my problem.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/29/2010(UTC)
Posts: 5
|
sidfink43, I'm still hoping that you can still help me. Thanks. :D :) :) Originally Posted by: sidfink43 Well, sorry that did not give a complete answer, and without one of the machines in front of me I really cannot tell you what your problem is.
I may have on in the shop but will not be in there until Tuesday at the earliest, and if so I will try to look at it and take some pics.
Maybe someone else can chime in here to help.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
I do not have one in the shop, so I can only suggest you contact Whirlpool and see if they can provide you with a diagram.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
