Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Fred
Options
Go to last post Go to first unread
Model: SS363BETT4 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
frednk  
#1 Posted : Tuesday, December 8, 2009 1:05:17 PM(UTC)
frednk

Rank: Member

Groups: Registered
Joined: 12/8/2009(UTC)
Posts: 5
Everything works but the oven will not lite. How can i test to find out what part i need?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, December 8, 2009 5:07:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Does the Bake igniter (#14 on the diagram) glow?

Gene.
Back to top
frednk  
#3 Posted : Wednesday, December 9, 2009 7:16:21 AM(UTC)
frednk

Rank: Member

Groups: Registered
Joined: 12/8/2009(UTC)
Posts: 5
Originally Posted by: Gene Go to Quoted Post
Does the Bake igniter (#14 on the diagram) glow?

Gene.

yes it does.
Back to top
frednk  
#4 Posted : Wednesday, December 9, 2009 7:21:13 AM(UTC)
frednk

Rank: Member

Groups: Registered
Joined: 12/8/2009(UTC)
Posts: 5
yes it does glow but does not lite.
Back to top
Gene  
#5 Posted : Wednesday, December 9, 2009 2:05:56 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a weak igniter. New igniter comes without mounting bracket. You have to use the bracket from the old igniter. Be very careful not to break the coil.

- The igniter Part number: AP2934763
Part number: AP2934763



Gene.
Back to top
frednk  
#6 Posted : Wednesday, December 9, 2009 5:13:26 PM(UTC)
frednk

Rank: Member

Groups: Registered
Joined: 12/8/2009(UTC)
Posts: 5
Originally Posted by: frednk Go to Quoted Post
yes it does glow but does not lite.

Gene this one you have sent a picture of is just like the broiler one. The one i have is flat and only two inches long. And it is for the oven.
Back to top
Gene  
#7 Posted : Wednesday, December 9, 2009 5:41:22 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
According to the diagram and parts list, both Broil and Bake igniters in this oven are identical and should look as shown on the previous picture. If the Bake igniter in your oven has a short ceramic, that means it had been already replaced by someone else.

Electrically igniters with long and short ceramics are the same and are interchangeable. The only difference is the igniter with short ceramic comes with the mounting bracket what makes the installation easier.

- The flat igniter with the short ceramic Part number: AP2634719
Part number: AP2634719



Gene.
Back to top
frednk  
#8 Posted : Wednesday, December 9, 2009 6:08:25 PM(UTC)
frednk

Rank: Member

Groups: Registered
Joined: 12/8/2009(UTC)
Posts: 5
Originally Posted by: Gene Go to Quoted Post
Does the Bake igniter (#14 on the diagram) glow?

Gene.

Gene I took the ignitor out of the oven and to my surprise it is not 2 inches but 2 inches is all you see, it is 5 1/2 inches long so i should order the long one right.
Back to top
Users browsing this topic
Guest (5)
Similar Topics
No cold water after relacing drain pump...fred2222 (Washer Repair)
by fred2222 3/31/2014 4:51:43 PM(UTC)
Fred (Refrigerator & Freezer Repair)
by fburgard 11/12/2013 1:49:43 PM(UTC)
Fred (Refrigerator & Freezer Repair)
by wftw4haiti 3/27/2012 8:40:20 AM(UTC)
Fred (Dryer Repair)
by fredella4@verizon.net 1/22/2011 3:20:37 PM(UTC)
Fred (Dryer Repair)
by fredella 8/19/2010 7:05:47 AM(UTC)
Fred (Dryer Repair)
by fredella 8/18/2010 9:28:57 AM(UTC)
Freezer ok but not too cold, Fredge warm (Refrigerator & Freezer Repair)
by skopedia 7/13/2009 1:36:13 PM(UTC)
Fred Maringer (Oven Repair (including Ranges and Cooktops))
by Fred Maringer 3/1/2009 9:59:46 AM(UTC)
Fred (Dishwasher Repair)
by wilkerson 11/19/2007 12:35:37 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET