Rank: Member
Groups: Registered
Joined: 2/1/2008(UTC)
Posts: 4
|
How Do I Adjust The Belt On My Maytag Atlantis Or Tighten The Belt.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/28/2007(UTC)
Posts: 29
|
There is no adjustment that i know of, what i have noticed is that like everything else these days these belts are made of cheaper quality material compared to the older maytag washers the ones that use two belts so if your machine is used a lot you can just buy another two or three belts and keep as spares.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Check the plastic tranny pulley, might have a burnt spot.
If ok, check the motor mount rollers and clean if necessary, they might be sticking and preventing proper tension on the belt.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/1/2008(UTC)
Posts: 4
|
the washer fills but it does not agitate or spin or drain at all. and the motor plastic which holds the belt broke off.:confused:
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
