Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE Washer agitator not working and will not spin
Options
Go to last post Go to first unread
Model: WSKS2060T Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
bobbertj  
#1 Posted : Friday, February 1, 2008 8:40:26 AM(UTC)
bobbertj

Rank: Member

Groups: Registered
Joined: 2/1/2008(UTC)
Posts: 14
I have retried washer and agitator is working.The machine doesn't spin, but water fills and pumps out.Could this be a coupler hub assembly problem?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Friday, February 1, 2008 1:38:51 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Unfortunately I do not have any experience with such washer.

Maybe somebody else on the forum can help you better.

Gene.
Back to top
bobbertj  
#3 Posted : Friday, February 1, 2008 5:07:37 PM(UTC)
bobbertj

Rank: Member

Groups: Registered
Joined: 2/1/2008(UTC)
Posts: 14
Gene thanks for trying.I hope that someone else might have worked on the smaller type washer.
Back to top
misterfixall  
#4 Posted : Saturday, February 2, 2008 3:34:47 PM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
is this an apartment size washer that rolls to sink 110 volts? are you saying machine does fill + agitate +drain. the only thing it does not do is spin?l
Back to top
bobbertj  
#5 Posted : Sunday, February 3, 2008 5:25:06 AM(UTC)
bobbertj

Rank: Member

Groups: Registered
Joined: 2/1/2008(UTC)
Posts: 14
This is like the large washer.Is similiar to the stack units except it is just the washer. I have narrowed it down to a solinoid that shifts from spin to agitate cylces or a defective timer. I don't think it's the timer as it doesn't spin when you put it in the separate spin cycle.How do you test out a solenoid with the following specs?AC127V50/80,150mA.If you have any other suggestions I would like to get this running again.Thank You
Back to top
bambiblaster  
#6 Posted : Friday, April 4, 2008 7:43:26 PM(UTC)
bambiblaster

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/4/2008(UTC)
Posts: 116
There is a tech sheet under the top .. it will have the testing and trouble shooting steps...
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET