Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Frigidaire Affinity Washer Water Valve Harness Locking Plugs
Options
Go to last post Go to first unread
Model: LTF7000EG0 Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
rickden  
#1 Posted : Wednesday, July 22, 2009 4:34:40 PM(UTC)
rickden

Rank: Member

Groups: Registered
Joined: 7/22/2009(UTC)
Posts: 1
I ordered the replacement part for the water valve/Dispenser/NTC/Short Tube. There are three locking plugs in the water valve harness that connect to part I need to replace.

I've found the repair manual online, and it simply notes that these are locking plugs. I can see that there is a small ridge that is part of the locking mechanism, but even after lifting the plug away from that ridge, these three plugs do not want to come off.

I'm hesitant to apply too much force trying to remove them.

Does anyone know if there is a "trick" to disconnecting the locking plugs from the part so that I can replace the part?
rickden attached the following image(s):
photo.jpg
photo2.jpg
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Thursday, July 23, 2009 12:39:53 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Check if there is another locking tab on the bottom of the plug. If not then just lift up the locking tab and pull the plug out.

Here are the breakdown diagrams and Replacement parts for FRG LTF7000EG0 | AppliancePartsPros.com

Gene.
Back to top
sadsack  
#3 Posted : Monday, August 3, 2009 2:48:58 PM(UTC)
sadsack

Rank: Member

Groups: Registered
Joined: 8/3/2009(UTC)
Posts: 5
frigidaire water valve is stripped and needs to be replaced. How do i take off the back? The model is -fleb8200dso
Back to top
sadsack  
#4 Posted : Monday, August 3, 2009 2:54:36 PM(UTC)
sadsack

Rank: Member

Groups: Registered
Joined: 8/3/2009(UTC)
Posts: 5
It's a frigidaire washer model-fleb8200dso and it's a small hole. And it's not comimng out.
Back to top
sadsack  
#5 Posted : Monday, August 3, 2009 2:58:24 PM(UTC)
sadsack

Rank: Member

Groups: Registered
Joined: 8/3/2009(UTC)
Posts: 5
Originally Posted by: sadsack Go to Quoted Post
It's a frigidaire washer model-fleb8200dso and it's a small hole in the back of the washer. It icomes out a little but not all the way. Do i continue to try to pull it
Back to top
sadsack  
#6 Posted : Monday, August 3, 2009 3:00:52 PM(UTC)
sadsack

Rank: Member

Groups: Registered
Joined: 8/3/2009(UTC)
Posts: 5
Originally Posted by: sadsack Go to Quoted Post
Originally Posted by: sadsack Go to Quoted Post
It's a frigidaire washer model-fleb8200dso and it's a small hole in the back of the washer. It icomes out a little but not all the way. Do i continue to try to pull it

There are no screws in the back to take off. So how do i get it out?
Back to top
sadsack  
#7 Posted : Monday, August 3, 2009 3:02:57 PM(UTC)
sadsack

Rank: Member

Groups: Registered
Joined: 8/3/2009(UTC)
Posts: 5
Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
Back to top
Gene  
#8 Posted : Tuesday, August 4, 2009 12:52:03 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You can find the instructions in the Service manual (this link would not last long - copy it to your comp).

Here are the breakdown diagrams and Replacement parts for FRG FLEB8200DS0 | AppliancePartsPros.com

Gene.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET