Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

5 Pages«<2345>
Options
Go to last post Go to first unread
richappy  
#31 Posted : Monday, January 7, 2008 3:30:34 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Just use the regular cycle, diagnostics probably no help.
Neal  
#32 Posted : Monday, January 7, 2008 3:47:54 PM(UTC)
Neal

Rank: Member

Groups: Registered
Joined: 12/27/2007(UTC)
Posts: 21

Feel real stipud! Must of not had the one lead on correctly. Was not on.
Header gets hot now. But the motor doesn't run, is there a fuse that might of blown when I switched the control?
Gene  
#33 Posted : Monday, January 7, 2008 4:53:58 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Does it anything or it's completely dead?

Gene.
Neal  
#34 Posted : Monday, January 7, 2008 5:13:40 PM(UTC)
Neal

Rank: Member

Groups: Registered
Joined: 12/27/2007(UTC)
Posts: 21

The clock or face index's, you can hear the pump run to fill the tub and heat up. Then it would seem to "wash" then empty. The arm on the bottom doesn't rotate. It's in the same place every time you open the door.
Gene  
#35 Posted : Monday, January 7, 2008 5:44:16 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Double check all wires and plugs under the dishwasher.

Gene.
Neal  
#36 Posted : Tuesday, January 8, 2008 1:15:42 PM(UTC)
Neal

Rank: Member

Groups: Registered
Joined: 12/27/2007(UTC)
Posts: 21

Ok, This is the latest. Double checked all connections. Everything looks good. Went to run quick rinse, The clock indexed on the face for awhile, It had filled with water. But the motor didn't run. The clock showed 2, then emptied. I don't get it. This has me frustrated.
???
Gene  
#37 Posted : Tuesday, January 8, 2008 1:25:08 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I can not believe it but sounds like the control board or the wash motor bad.

Check if the power is coming to the motor when the control calls for the wash.

Gene.
Neal  
#38 Posted : Tuesday, January 8, 2008 1:47:22 PM(UTC)
Neal

Rank: Member

Groups: Registered
Joined: 12/27/2007(UTC)
Posts: 21

Where at? On the capactor?
Neal  
#39 Posted : Tuesday, January 8, 2008 4:22:18 PM(UTC)
Neal

Rank: Member

Groups: Registered
Joined: 12/27/2007(UTC)
Posts: 21

The best I can tell is this, I have 120volts on the one leg at the control board for the motor and not the other. I didn't check down at the capacitor. So would mean the motor is shot?
Gene  
#40 Posted : Tuesday, January 8, 2008 8:08:42 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Did you unplug the motor connector before testing the power?

Did you measure the power between the hot and the neutral at the motor plug?

Gene.
Users browsing this topic
5 Pages«<2345>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.