Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
DonnaBishop35  
#1 Posted : Monday, July 20, 2009 6:19:12 AM(UTC)
DonnaBishop35

Rank: Member

Groups: Registered
Joined: 7/20/2009(UTC)
Posts: 1

This is a side by side fridge with water & ice in the door. The ice dispenser will dispense ice if I put some that I purchased at the store but it will not make its own. The ice is made but will not shoot out in the tray. The sensor seems to be working properly.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Monday, July 20, 2009 6:50:11 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Make sure your freezer temperature is below 15 degrees, if so your icemaker mold heater may have a bad connection with the front module. I would just order a new one.Part #AP3182733 Call this supplier with your model # so they can confirm this is the right one.
Users browsing this topic
Guest (2)
Similar Topics
Whirlpool Ice Maker Not Working - Low Voltage in Harness (Refrigerator & Freezer Repair)
by bthrem 4/7/2014 2:59:23 PM(UTC)
Whirlpool Ice Maker Not Working (Refrigerator & Freezer Repair)
by ARAYK 6/13/2013 8:11:31 AM(UTC)
Whirlpool ice maker not working again (Refrigerator & Freezer Repair)
by rcb 12/4/2012 3:29:38 PM(UTC)
Whirlpool ice maker not working (Refrigerator & Freezer Repair)
by scottietj 7/23/2012 7:26:56 PM(UTC)
Whirlpool ice maker not working correctly (Refrigerator & Freezer Repair)
by tiltonpr 8/12/2009 9:34:29 AM(UTC)
whirlpool ice maker not working (Refrigerator & Freezer Repair)
by hojo55 4/9/2009 6:14:59 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.