Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
dvassino  
#1 Posted : Wednesday, January 2, 2008 9:21:22 AM(UTC)
dvassino

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 6

Yesterday the refrigerator was very warm. I checked the freezer and that seemed cold. I cleaned condenser thinking it was just a dust buildup. Cool air is coming into the refrigerator on the bottom left, but the top shelf is pretty warm, currently 51 degrees. The condenser motor and fan are running. Should I disconnect from power and let it sit for a while? Maybe there is an ice buildup somewhere.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, January 2, 2008 9:34:22 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The first thing I would recommend is perform the test as described in the attached service manual (page 44) and follow all instructions.

- Here are the break down diagrams for the GE refrigerator Model GSS25JFMBWW

Good luck.
Gene.
File Attachment(s):
PSS and GSS refrigerators service manual.pdf (1,717kb) downloaded 85 time(s).
dvassino  
#3 Posted : Wednesday, January 2, 2008 2:56:13 PM(UTC)
dvassino

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 6

Hi Gene,

I checked the test procedure in the manual but it does not match my control knobs on my refrigerator. Is there a different manual or a different way of running the test.
Thanks,
Gene  
#4 Posted : Wednesday, January 2, 2008 3:07:07 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is the difference?

Gene.
dvassino  
#5 Posted : Wednesday, January 2, 2008 3:13:11 PM(UTC)
dvassino

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 6

My refrigerator has knobs and no digital display.
dvassino  
#6 Posted : Wednesday, January 2, 2008 3:17:02 PM(UTC)
dvassino

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 6

I should clarify. I'm trying to put the system into self diagnostics but the manual is refering to a digital temp control panel.
dvassino  
#7 Posted : Wednesday, January 2, 2008 5:57:12 PM(UTC)
dvassino

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 6

Removed the freezer back cover and saw the evaporator completely frozen solid. I performed the voltage test for the def heater, no voltage at main board connections to def heater. Performed the resistance test on the thermistor test and they seemed good. I will wait until the ice melts tomorrow and see what happens.
Gene  
#8 Posted : Wednesday, January 2, 2008 6:10:20 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Check the defrost thermostat while the evaporator is frozen.

Gene.
dvassino  
#9 Posted : Friday, January 4, 2008 2:43:34 AM(UTC)
dvassino

Rank: Member

Groups: Registered
Joined: 1/2/2008(UTC)
Posts: 6

Defrost thermostat measured about 2.5 volts.
I let the unit thaw out and it is running perfect for 24 hours. I still don't know what caused the problem or if it will come back.
Thanks,
Gene  
#10 Posted : Friday, January 4, 2008 9:21:00 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If it will come back, I would recommend to disconnect the defrost thermostat while it's still frozen and check continuity across the thermostat wires.

Replace the defrost thermostat if it's open.

Gene.
Users browsing this topic
Guest (5)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.