|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » GE Monogram |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: ZISW42EMD Brand: GE Age: More than 10 years
Need help replacing the defrost heater and thermostat. I pulled the tray out of the top of my GE Monogram that has the evaporator and compressor.
The housing around the evaporator is tack-welded to the aluminum tray. How do I get the evaporator out to replace the defrost heater element? It seems impossible without drilling out the tack welds on the aluminum evaporator coil housing but want expert advice before I do this. Also, there appears to be 2 thermostats...do I replace both or one of them? Part #'s WR9X502 & WR50X108. I already replaced the Defrost Control and that didn't fix it. I hope it's the defrost heater and or thermostat. Thanks for your help. Ads By Google Related Models Last edited by yobri : 08-15-2009 at 02:39 PM. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GE monogram | avilevy | Dishwasher Repair | 0 | 06-10-2009 08:56 AM |
| GE Monogram | ejleiva | Microwave Repair | 1 | 04-02-2009 04:23 PM |
| GE Monogram Dispenser | CalvinT08 | Refrigerator & Freezer Repair | 0 | 12-27-2008 05:28 PM |
| GE Monogram Cooktop | jkeeley | Oven Repair (including Ranges and Cooktops) | 0 | 12-22-2008 03:04 PM |
| GE Monogram warm | mike grunwald | Refrigerator & Freezer Repair | 0 | 12-22-2008 11:29 AM |