Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Matt315  
#1 Posted : Thursday, December 22, 2011 9:31:16 AM(UTC)
Matt315

Rank: Member

Groups: Registered
Joined: 12/22/2011(UTC)
Posts: 1

Can someone tell me how to remove the ice maker from this refrigerator. It looks like it should slide right out by releasing the little tab on the lower left corner, this only loosens it. There is ice frozen in the fingers and I can't get anything in there to free it up.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Joe / APP Team  
#2 Posted : Thursday, December 22, 2011 5:03:57 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Originally Posted by: Matt315 Go to Quoted Post
Can someone tell me how to remove the ice maker from this refrigerator. It looks like it should slide right out by releasing the little tab on the lower left corner, this only loosens it. There is ice frozen in the fingers and I can't get anything in there to free it up.


Duplicate post, previously answerred
Joe / APP Team  
#3 Posted : Friday, December 23, 2011 1:52:48 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Originally Posted by: Joe / APP Team Go to Quoted Post
Duplicate post, previously answerred



Matt,
Matt, First thing, unplug the power cord or remove power to the refrigerator, Then remove the ice cube container/bin from the compartment. In the left hand side wall of the ice maker / bin compartment you'll see the removable wire harness cover, that extends from the front of the compartment, back to the rear wall [AP4081955] . use a car or house key, insert it into the small rectangular opening and press down on the hidden locking tab and slide the panel forward a 1/4 to 3/8 of an inch, to dingage the tabs holding the panel to the wall. once the panel is removed, press down on the tab on the front left corner of the icemaker assembly and slide the whole assembly out of the compartment, then disconnect the wiring harness. Thanks and Good Luck

Thanks and Good Luck,
:) :) :)
Joe / APP Team  
#4 Posted : Friday, December 23, 2011 1:54:25 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Originally Posted by: Joe / APP Team Go to Quoted Post
Duplicate post, previously answerred



Matt,
Matt, First thing, unplug the power cord or remove power to the refrigerator, Then remove the ice cube container/bin from the compartment. In the left hand side wall of the ice maker / bin compartment you'll see the removable wire harness cover, that extends from the front of the compartment, back to the rear wall

Part number: AP4081955
Part number: AP4081955


use a car or house key, insert it into the small rectangular opening and press down on the hidden locking tab and slide the panel forward a 1/4 to 3/8 of an inch, to dingage the tabs holding the panel to the wall. once the panel is removed, press down on the tab on the front left corner of the icemaker assembly and slide the whole assembly out of the compartment, then disconnect the wiring harness. Thanks and Good Luck

Thanks and Good Luck,
:) :) :)
Joe / APP Team  
#5 Posted : Friday, December 23, 2011 2:07:25 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Originally Posted by: Joe / APP Team Go to Quoted Post
Matt,


Matt, First thing, unplug the power cord or remove power to the refrigerator, Then remove the ice cube container/bin from the compartment. In the left hand side wall of the ice maker / bin compartment you'll see the removable wire harness cover, that extends from the front of the compartment, back to the rear wall

Part number: AP4081955
Part number: AP4081955


use a car or house key, insert it into the small rectangular opening and press down on the hidden locking tab and slide the panel forward a 1/4 to 3/8 of an inch, to dingage the tabs holding the panel to the wall. once the panel is removed, press down on the tab on the front left corner of the icemaker assembly and slide the whole assembly out of the compartment, then disconnect the wiring harness. Thanks and Good Luck

Thanks and Good Luck,
:) :) :)
Users browsing this topic
Similar Topics
Removing Ice Maker -Kit. Aid French Door (Refrigerator & Freezer Repair)
by Ookie 3/26/2014 2:47:53 PM(UTC)
GE Arctica not colling after removing ice maker (Refrigerator & Freezer Repair)
by No Tomatoes 7/25/2012 12:26:37 PM(UTC)
Removing Ice Maker to Replace ADC Board (Refrigerator & Freezer Repair)
by jbarnes 5/30/2011 5:20:45 PM(UTC)
Trouble removing ice maker drive unit (Refrigerator & Freezer Repair)
by BDL68 10/12/2010 3:33:41 PM(UTC)
removing ice maker from Kenmore Elite (Refrigerator & Freezer Repair)
by Michael Nguyen 3/30/2009 12:40:02 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.