Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
bremark	Posted: Tuesday, March 15, 2011 1:34:57 AM(UTC)
	thanks Gene I will try that
Gene	Posted: Monday, March 14, 2011 6:05:14 PM(UTC)
	The part number for the timer is correct. Might be the new timer is defective. Otherwise I don't see anything else what can cause it. Try to exchange the timer. Gene.
bremark	Posted: Sunday, March 13, 2011 3:54:20 AM(UTC)
	Originally Posted by: leosar nothing but timer does this Everything works fine it just wont shut off,so we cant leave the house and let it finish a cycle.I also made sure duct was clear
leosar	Posted: Saturday, March 12, 2011 3:31:07 PM(UTC)
	Originally Posted by: bremark 8299778 model m460-g 1/3 hp,15/7.5a 076-0195a30864 ckt. tm-wb 0.25a 125/250vac 014-62717 ckt. tm-or bu-v 0.25a 125/250vac 8299778 FSP made in mexico I just took one wire at a time from the old to the new and plugged in. nothing but timer does this
bremark	Posted: Thursday, March 10, 2011 3:31:19 AM(UTC)
	Originally Posted by: Gene What is the part number of the timer you installed? What is written on the timer motor and the label on the timer? Gene. 8299778 model m460-g 1/3 hp,15/7.5a 076-0195a30864 ckt. tm-wb 0.25a 125/250vac 014-62717 ckt. tm-or bu-v 0.25a 125/250vac 8299778 FSP made in mexico I just took one wire at a time from the old to the new and plugged in.
Gene	Posted: Wednesday, March 9, 2011 3:01:08 PM(UTC)
	What is the part number of the timer you installed? What is written on the timer motor and the label on the timer? Gene.
bremark	Posted: Wednesday, March 9, 2011 1:55:56 AM(UTC)
	Originally Posted by: Gene Sorry for the delay. Does it do it on both timed dry and auto dry? Gene. Yes it does it on all cycles
Gene	Posted: Tuesday, March 8, 2011 1:16:58 PM(UTC)
	Sorry for the delay. Does it do it on both timed dry and auto dry? Gene.
bremark	Posted: Saturday, March 5, 2011 11:38:07 AM(UTC)
	Originally Posted by: Gene Would it restart by itself if you will open the door and then close it after a few seconds during the cycle or you have to push the start button? Here are the breakdown diagrams and Replacement parts for WHIRLPOOL LER4634PQ0 29`` ELECTRIC DRYER \| AppliancePartsPros.com Gene. no I have to push the start button
bremark	Posted: Saturday, March 5, 2011 11:36:42 AM(UTC)
	no I have to push the start button

Notification