Dishwasher Repair

thebling · #1 (**permalink**) 02-21-2013, 10:37 AM

The dishwasher runs fine. After we unload it and then reload it, it won't start. When we hit the start button it just beeps 15 times and nothing happens. Then I go to the circuit breaker and shut down the power to the dishwasher for 10 seconds then turn the circuit breaker back on. After that the dishwasher works fine for one cycle. Basically I have to hit the circuit breaker each time to run it. Any advice would be appreciated.

Thanks,
Tom

Simon / APP Team · #2 (**permalink**) 02-21-2013, 03:03 PM

Hi.

It's not an ordinary problem. Try to replace the control panel first, then the control board.
Get both parts and return the one you don't need.The APP will take it back even if you installed it.
Provide the complete model number of the unit.Missing the last digit.

Simon.

thebling · #3 (**permalink**) 03-28-2013, 01:51 PM

FYI. The problem was a bad door latch sensor.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fridigaire dishwasher no power to the dishwasher and water will not drain out	jarhead1984	Dishwasher Repair	0	02-27-2012 07:43 AM
Dishwasher control lights out and dishwasher stopped working	hatchchuck	Dishwasher Repair	1	12-26-2010 04:48 AM
Dishwasher will not empty no lights on front of dishwasher except led lines	badtothebone	Dishwasher Repair	0	05-13-2010 02:17 PM
Dishwasher will not empty no lights on front of dishwasher except led lines	badtothebone	Dishwasher Repair	0	05-13-2010 02:14 PM
dishwasher spray arm melted to heating element and now dishwasher not working	msphillips2	Dishwasher Repair	0	05-08-2010 10:21 AM

Dishwasher won't run

Dishwasher Repair

The dishwasher runs fine. After we unload it and then reload it, it won't start. When we hit the start