Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
GNACK  
#1 Posted : Friday, May 28, 2010 7:50:26 AM(UTC)
GNACK

Rank: Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 11

Just replaced the front panel to get my dishwasher up and running. The unit runs for a very long time in wash mode, leading me to believe it is trying to heat the water to a higher temperature. I have tried turning up the temp of the water heater and running water at the faucet prior to starting the dishwasher. Neither of these helped. Do I need to replace the heater coil too? Any ideas appreciated.
Thanks
Gary
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Friday, May 28, 2010 1:36:35 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Gary,

Check the water temperature inside the dishwasher.

There are two parts in the heating circuit which you have to check for continuity to figure out what is wrong with the dishwasher. They are: the high limit thermostat (#30 on the diagram) and the heating element. The high limit thermostat should show about 0 Ohms resistance and the heating element should be about 10 - 35 Ohms.

You also can run the Diagnosis cycle as described in the Tech sheet.

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL KUDI01ILBL2 Undercounter Dishwasher | AppliancePartsPros.com

Gene.
GNACK  
#3 Posted : Saturday, May 29, 2010 6:18:49 AM(UTC)
GNACK

Rank: Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 11

Hi Gene
thanks for the tips!! What should the water temp be in the tub?
Thanks for your reply...
Gary
Users browsing this topic
Guest (4)
Similar Topics
Dishwasher runs and runs (Dishwasher Repair)
by rniehoff 6/27/2012 5:48:33 AM(UTC)
Kitchen Aid Dishwasher runs and runs (Dishwasher Repair)
by GNACK 3/1/2011 7:28:04 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.