Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
patrick tierney  
#1 Posted : Wednesday, April 28, 2010 6:48:38 AM(UTC)
Quote
patrick tierney

Rank: Member

Groups: Registered
Joined: 3/27/2010(UTC)
Posts: 4

Has power, set all the temps and time and all that good stuff, press start button and you can hear a beep but nothing happens. what do i need to check or replace. HELP PLEASE.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Wednesday, April 28, 2010 7:38:51 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for WHIRLPOOL WED8300SW1 27" Electric Dryer | AppliancePartsPros.com

Here is the tech sheet
http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208572759.pdf

Try the diagnostics on Page 2 of the tech sheet.

If the motor circuit fails.
You will see from the wiring diagram in the tech sheet you have 2 shut off devices in line with your motor. That is where I would start.

Could be that the belt is broken.

Could be that the thermal fuse is blown.
This is the one on the blower (Item 38 in Section 3)
The most common cause of this blowing is a dirty vent system or it's louvers not opening.
THIS FORUM IS DEAD!!!!!!!
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Motor running -- nothing happening (Dishwasher Repair)
by sueono 12/16/2010 9:13:42 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.