Rank: Member
Groups: Registered
Joined: 5/28/2008(UTC)
Posts: 2
|
Hey,
My maytag dishwasher is displaying E3 just before it finishes its cycle....
I have misplaced my manual and was wondering if anyone would happen to know what it means? I dont want to call a repair man out if its just a blocked drain!
If anyone could help I would really appreciate it!
Thanks you
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/28/2008(UTC)
Posts: 2
|
The model number is MJD2000AAW!!!!!!!!!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
The model number you posted does not come up.
Is it an American model? If it is - verify the model number and repost it.
If it is a Canadian model - unfortunately we are not able to find any information.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/24/2008(UTC)
Posts: 2
|
I have the same model Maytag MJD2000AAW Dishwasher with the same problem the E3 Error message, Did you have any luck with the repair? Im located in Australia.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/24/2008(UTC)
Posts: 2
|
I have the same model Dishwasher Maytag MJD2000AAW, with the same error message, I have the manual, but it does not give any information on the E3 error message.
Have you resolved your problem, or did you find out what was wrong?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/15/2009(UTC)
Posts: 2
|
Hi
I experienced the same E3 error some weeks back. I called the repair man and a circuit board was replaced. All has been well until today when it did the E3 again. Hopefully it was a one off error, if not I'll be looking for competition to the original repair firm used.
I have the manual and the error details are as follows -
E1
Cause: Water supply switched off.
Remedy: Switch off appliance. Turn on water supply. Reset the cycle.
E2
Cause: Problem with electronic temperature control.
Remedy: Call service for assistance.
E3
Cause: The water heater element does not work properly or the filter mesh is blocked.
Remedy: Clean the filter mesh and if the problem continues please contact service
E4
Cause: The appliance does not discharge water.
Remedy: Check that the discharge hose is not bent, syphon is not blocked, filters are not blocked.
Hope that helps!
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
