Kenmore Ultra Wash Not Dispensing Rinse Aid - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore Ultra Wash Not Dispensing Rinse Aid Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 665.16034402	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

Ibrokeit		#1 Posted : Sunday, August 26, 2007 5:17:41 PM(UTC)
Rank: Member Groups: Registered Joined: 8/26/2007(UTC) Posts: 1		My Kenmore Ultra Wash (Mod #: 665.16034402) stopped dispensing rinse aid. Here's what I have done so far: * I found the service sheet and ran through the diagnostic cycles. * If I'm interpreting the sheet correctly, the only time the DETERGENT / RINSE AID DISPENSER is activated is in cycle 12. The solenoid clearly is energized and the detergent door does open. (I'm assuming this solenoid is also used to dispense the rinse aid at point in some rinse cycle.) Ideas anyone?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

canonsen		#2 Posted : Thursday, January 17, 2008 12:37:49 PM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2008(UTC) Posts: 3		I have a Kenmore 16592 model 66516592201 with a detergent cup that won't open. Can you elaborate on the diag cycles you speak of, please?


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Friday, January 18, 2008 12:04:05 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Measure resistance across the detergent dispenser solenoid terminals. It suppose to be between 280 to 340 Ohms. Replace the detergent dispenser assembly if the reading is wrong. It suppose to be replaced together with the rinse aid sensor. Check wires to the solenoid. If there is nothing wrong - replace the control board. - The part number for the detergent dispenser assembly is AP3183112 - The part number for the rinse aid sensor is AP3176640 - The part number for the control board is AP3775964 Gene.


User Profile View All Posts by User View Thanks

canonsen		#4 Posted : Saturday, January 19, 2008 2:10:04 PM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2008(UTC) Posts: 3		I'll keep this info handy, however, I think the problem was a tray that shifted back when the basket was pushed in and it was just enough to block the door. Dooh!


User Profile View All Posts by User View Thanks

oltimer		#5 Posted : Tuesday, February 26, 2008 5:49:31 AM(UTC)
Rank: Member Groups: Registered Joined: 2/26/2008(UTC) Posts: 1		I would suggest checking the spring on the dispenser door, it appears that the door may open a crack but will not flip up to release the tablet from the dispenser and will not totally dissolve, if powder detergent it will usually be washed out of the cup.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close