Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
ThomasA  
#1 Posted : Wednesday, May 28, 2008 4:33:45 PM(UTC)
ThomasA

Rank: Member

Groups: Registered
Joined: 5/28/2008(UTC)
Posts: 1

IceMaker has stalagmites (icicles) from bottom of ice tray unit (originating from weep holes).
defrosted, warmed input tube, examined heating wires for calcium deposit, ... . it does produce ice, less than half normal, cubes are slightly smaller, but can produce one long (12 inches) stalagmite in 24 hours.

is it overfilling the tray? ideas on how to isolate the problem?

of course the extended warranty expired this past april.

thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Appliance repair in OC  
#2 Posted : Wednesday, May 28, 2008 6:15:24 PM(UTC)
Appliance repair in OC

Rank: Member

Groups: Registered
Joined: 5/24/2008(UTC)
Posts: 32

Could be leaky ice maker, you'll need a new one then.
jansimply  
#3 Posted : Thursday, February 25, 2010 8:31:20 AM(UTC)
jansimply

Rank: Member

Groups: Registered
Joined: 2/25/2010(UTC)
Posts: 5

Originally Posted by: ThomasA Go to Quoted Post
IceMaker has stalagmites (icicles) from bottom of ice tray unit (originating from weep holes).
defrosted, warmed input tube, examined heating wires for calcium deposit, ... . it does produce ice, less than half normal, cubes are slightly smaller, but can produce one long (12 inches) stalagmite in 24 hours.

is it overfilling the tray? ideas on how to isolate the problem?

of course the extended warranty expired this past april.

thanks


Thomas, don't expect any help on here. All the so called good advice tells everyone to just go buy another one. The advice you got is the same one they gave me. This is a total joke!
Qtip  
#4 Posted : Thursday, February 25, 2010 7:26:48 PM(UTC)
Qtip

Rank: Member

Groups: Registered
Joined: 11/2/2009(UTC)
Posts: 176

was the tube that feeds water to the icemaker frozen?? if so that indicates a problem with the water valve. ignore jansimply - the reason nobody wants to help him is because of his reply to someone that was volunteering their time to try and help him.
Qtip  
#5 Posted : Thursday, February 25, 2010 7:41:38 PM(UTC)
Qtip

Rank: Member

Groups: Registered
Joined: 11/2/2009(UTC)
Posts: 176

i think the best way to diagnose this problem would be to watch the icemaker closely until it calls for water.. when its filling check to see if its overfilling or just leaking out the bottom. if its overfilling the problem is likely the water valve but if its leaking from the icemaker itself and is not overfilling then you'll have to replace the icemaker.
jansimply  
#6 Posted : Friday, February 26, 2010 3:02:15 AM(UTC)
jansimply

Rank: Member

Groups: Registered
Joined: 2/25/2010(UTC)
Posts: 5

I couldn't see anything frozen. Everything looks normal. Water flows in like it is suppose to and nothing seems to be leaking or overflowing. It seems it is making the ice, but is melting it away before it can totally fill up. Like I said, one minute it will be about 1/4 full and when I look again and hour or so later, it has melted away and then, it will make ice again and do the same. I have always tried to keep the components cleaned every six months like it tells in the manuel. I keep the cleaning solution to do this mantenance because I take care of my appliances. I keep a water filter that I flush out like it states to do before I connect it to the ice maker. Thanks for the info. I'll just keep trying different things. I appreciate any help that is given. Thanks. I bought this 3/7/04 on and also purchased a five year warranty. Although on my receipt it says the warranty expires 3/7/09, it should say 3/7/10 because it comes with a one year warranty to begin with. Regardless, appliances always seem to go out on you as soon as the warranty has expired regardless if it is one year or five additional years. Again thanks!
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.