Rank: Member
Groups: Registered
Joined: 5/9/2008(UTC)
Posts: 1
|
Had to disconnect/unplug and move washer last night, reconnected it plugged it in and forgot to turn on the hot water supply valve. Wife ran washer last night and now the door is locked and stuck on rinse cycle. Water is turned on and hose is full of water(no airplug in hose). Have unplugged and plugged back in and pressed all buttons(Pause,Cancel,Start,etc.) Door is still locked and same constant noise coming from washer. Do not have manual. Any suggestions to just get the door open to get laundry out would be helpful. Any suggestions on how to get it to start over on a brand new cycle would be even more helpful.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
To manually unlock the door you have:
1. Unplug the power cord
2. Remove the bottom panel
3. Reach up along the inside of the front panel and locate the bottom of the door latch assembly
4. Located on the bottom of the door latch assembly is a tear-drop shaped tab
5. Gently pull the tab down about 1/4" or until a click is heard
The door may now be opened.
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
