Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dryer malfunction
Options
Go to last post Go to first unread
Model: DDG7980GELAD Brand: GE Age: More than 10 years
Previous Topic Next Topic
tomted1  
#1 Posted : Thursday, May 8, 2008 10:01:03 AM(UTC)
tomted1

Rank: Member

Groups: Registered
Joined: 5/8/2008(UTC)
Posts: 8
The gas dryer is electrically energized and hums, although the drum doesn't turn, when the door is closed or open. The only method of turning it off is to either set the timer to zero or unplug it. The drum doesn't turn when the door is closed and the timer has minutes on it. Pushing the start button makes no difference.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
misterfixall  
#2 Posted : Thursday, May 8, 2008 11:14:01 AM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
check to see if drum belt is broken. possible motor problem if belt not broken
Back to top
SublimeMasterJW  
#3 Posted : Thursday, May 8, 2008 12:02:00 PM(UTC)
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
Look in and see if the belt is broken. From what you are describing it sounds like the gas assembly is trying to fire but the drum ain't turning. To replace the belt you are gonna have to remove the front panel. You may as well give it a good cleaning while you are at it. Also inspect the slides and rear bearing.
Back to top
tomted1  
#4 Posted : Thursday, May 8, 2008 12:58:52 PM(UTC)
tomted1

Rank: Member

Groups: Registered
Joined: 5/8/2008(UTC)
Posts: 8
Thanks mfa and SMJW but why would the motor be energized when the door is closed?
Back to top
SublimeMasterJW  
#5 Posted : Thursday, May 8, 2008 2:03:59 PM(UTC)
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
when you shut the door the gas trys to work . must be getting power through that switch. I have seen it. Check the motor swtch. One that old might be all full of stuff and sticking. Did you break down the dryer yet? Get the drum out, clean and inspect the motor.
Back to top
tomted1  
#6 Posted : Thursday, May 8, 2008 9:59:19 PM(UTC)
tomted1

Rank: Member

Groups: Registered
Joined: 5/8/2008(UTC)
Posts: 8
OK, back from work and able to flip front panel and see that the belt is in place. I guess I'll look to the motor. It is nearly 18 years old so that wouldn't be too surprising. Hmmm, if it's the motor, do I replace it or buy a new dryer? I've replaced the slides and rear bearing, some gas valve parts and been through a couple of igniters over the years.
Back to top
SublimeMasterJW  
#7 Posted : Friday, May 9, 2008 3:39:03 AM(UTC)
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
These newer appliances are not worthy to stand next to a fine old machine like that. The motor is really the heart of the dryer. I would definately replace it.
Back to top
Users browsing this topic
Guest (5)
Similar Topics
dryer malfunction (Dryer Repair)
by Mike Julian 5/24/2017 12:32:37 PM(UTC)
Dryer Malfunction (Dryer Repair)
by RenoRandy 1/16/2011 9:10:09 AM(UTC)
GE Dryer Malfunction - Timer or Thermostat? (Dryer Repair)
by Manfred 1/4/2011 7:04:30 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET