Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
trangle flat plastic part laying in bottom of frezer compartment
Options
Go to last post Go to first unread
Model: ED2NHGXT000 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
barbgraham  
#1 Posted : Monday, February 15, 2010 1:17:23 PM(UTC)
barbgraham

Rank: Member

Groups: Registered
Joined: 2/15/2010(UTC)
Posts: 2
The ice has been going over the backside of the frezer compartment. We took it out and found a flat white plastic cover of some sort, with little flaps, that look like they hook over something. The part has a DWG
# 2304353 and below that # is a 010769. We don't know where this part goes. Can you help?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
bhough56  
#2 Posted : Sunday, July 17, 2011 11:21:22 AM(UTC)
bhough56

Rank: Member

Groups: Registered
Joined: 7/17/2011(UTC)
Posts: 1
It attaches to the metal arm of the ice maker. Due to the height of the icemaker this keeps the icemaker from making too much ice and overflowing.
Back to top
leroybarton  
#3 Posted : Tuesday, July 16, 2013 3:21:11 AM(UTC)
leroybarton

Rank: Member

Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 1
Thank you for posting your very helpful information.
Back to top
DUFFEY30  
#4 Posted : Wednesday, July 30, 2014 12:06:37 PM(UTC)
DUFFEY30

Rank: Member

Groups: Registered
Joined: 7/30/2014(UTC)
Posts: 1
Thanks also bhough56 for the solution. I was wondering why so many ice cubes were being made.
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET