Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
k75super  
#1 Posted : Monday, February 8, 2010 7:38:15 AM(UTC)
k75super

Rank: Member

Groups: Registered
Joined: 2/8/2010(UTC)
Posts: 3

Initially, oven or broiler would heat for ~ 10 min. and then F1 error code would occur. A new touch pad was installed which solved the problem and oven worked fine for ~ 2 yrs. Then, F1 error code appeared again like previously observed. All connectors on EOC were disconnected and all electrical connections were cleaned and were reconnected. Oven temp sensor gave 1100 ohms (room temp) when checked at connector at EOC board. Oven then worked for ~ 10 min. before an “F3” error code was now observed. Sometimes F3 is indicated immediately on pressing oven or broil on touchpad and sometimes not until after ~ 10 min of oven/broiler heating. Could this be an intermittent oven sensor problem? or does the EOC or touchpad( again) need replacement? Trying to decide if a new oven is warranted. Help!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, February 8, 2010 11:18:57 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Make sure the sensor plug is connected to the EOC really tight. Check the pins on the EOC for a broken soldering.

If there is nothing wrong and the sensor resistance is correct, replace the EOC.

- The EOC Part number: AP2127074
k75super  
#3 Posted : Monday, February 15, 2010 6:01:21 AM(UTC)
k75super

Rank: Member

Groups: Registered
Joined: 2/8/2010(UTC)
Posts: 3

Oven sensor checks out ok even up to temperature of ~ 400C. Connection all seem intact. Hope EOC fixes it and stays fixed for life of oven.
Gene  
#4 Posted : Monday, February 15, 2010 3:20:47 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Good luck and keep us posted.

Gene.
k75super  
#5 Posted : Friday, February 19, 2010 10:45:37 AM(UTC)
k75super

Rank: Member

Groups: Registered
Joined: 2/8/2010(UTC)
Posts: 3

New EOC fixed it.
Gene  
#6 Posted : Friday, February 19, 2010 2:55:51 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I'm glad you were able to fix it. Thank you for the feed back..

Gene.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.