F3 error code on Frigidaire oven Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: FEB30S5ABA	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

k75super		#1 Posted : Monday, February 8, 2010 7:38:15 AM(UTC)
Rank: Member Groups: Registered Joined: 2/8/2010(UTC) Posts: 3		Initially, oven or broiler would heat for ~ 10 min. and then F1 error code would occur. A new touch pad was installed which solved the problem and oven worked fine for ~ 2 yrs. Then, F1 error code appeared again like previously observed. All connectors on EOC were disconnected and all electrical connections were cleaned and were reconnected. Oven temp sensor gave 1100 ohms (room temp) when checked at connector at EOC board. Oven then worked for ~ 10 min. before an “F3” error code was now observed. Sometimes F3 is indicated immediately on pressing oven or broil on touchpad and sometimes not until after ~ 10 min of oven/broiler heating. Could this be an intermittent oven sensor problem? or does the EOC or touchpad( again) need replacement? Trying to decide if a new oven is warranted. Help!
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Monday, February 8, 2010 11:18:57 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Make sure the sensor plug is connected to the EOC really tight. Check the pins on the EOC for a broken soldering. If there is nothing wrong and the sensor resistance is correct, replace the EOC. - The EOC Part number: AP2127074 Here are the breakdown diagrams and Replacement parts for FRIGIDAIRE FEB30S5ABA Frigidaire/electric Range | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

k75super		#3 Posted : Monday, February 15, 2010 6:01:21 AM(UTC)
Rank: Member Groups: Registered Joined: 2/8/2010(UTC) Posts: 3		Oven sensor checks out ok even up to temperature of ~ 400C. Connection all seem intact. Hope EOC fixes it and stays fixed for life of oven.
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Monday, February 15, 2010 3:20:47 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Good luck and keep us posted. Gene.
User Profile View All Posts by User View Thanks

k75super		#5 Posted : Friday, February 19, 2010 10:45:37 AM(UTC)
Rank: Member Groups: Registered Joined: 2/8/2010(UTC) Posts: 3		New EOC fixed it.
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Friday, February 19, 2010 2:55:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I'm glad you were able to fix it. Thank you for the feed back.. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)