Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Marc71  
#1 Posted : Monday, April 28, 2008 10:28:38 AM(UTC)
Marc71

Rank: Member

Groups: Registered
Joined: 4/28/2008(UTC)
Posts: 2

My GE washer will not agitate. It does all other functions (fills, drains, spins out, etc) but after it initially fills the agitator just sits there and does nothing. There is a humming noise but no movement. Any ideas? The machine is 4 years old. Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
misterfixall  
#2 Posted : Monday, April 28, 2008 12:20:54 PM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622

it could be worn agitator hub or bell or motor or transmission , pull agitator off +observe bell in agitation it should go back+forth, check for loosness of bell, should not spin 360 degrees if bell ok you mayhave tranny or motor problem
Marc71  
#3 Posted : Tuesday, April 29, 2008 2:54:26 PM(UTC)
Marc71

Rank: Member

Groups: Registered
Joined: 4/28/2008(UTC)
Posts: 2

I pulled the agitator and indeed the plastic hub was worn out. Replaced it and it works as good as new. Thanks for your help.
Users browsing this topic
Guest (3)
Similar Topics
GE won't agitate (Washer Repair)
by dante fix 9/9/2013 7:37:11 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.