Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
BUDDY76  
#1 Posted : Tuesday, April 15, 2008 4:17:53 AM(UTC)
BUDDY76

Rank: Member

Groups: Registered
Joined: 4/15/2008(UTC)
Posts: 3

I have a 24" kenmore (Frigidaire?) electric ceramic top stove. While using the oven, the oven door locked and now won't open. Turned off breaker but no help. Now when I push the clean or bake or broil buttons, display reads "off" but no error messages- just"off" any advice?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
glen65  
#2 Posted : Tuesday, April 15, 2008 7:04:11 AM(UTC)
glen65

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/31/2008(UTC)
Posts: 322

Did you have the oven in self clean?
BUDDY76  
#3 Posted : Tuesday, April 15, 2008 8:41:23 AM(UTC)
BUDDY76

Rank: Member

Groups: Registered
Joined: 4/15/2008(UTC)
Posts: 3

Originally Posted by: BUDDY76 Go to Quoted Post
I have a 24" kenmore (Frigidaire?) electric ceramic top stove. While using the oven, the oven door locked and now won't open. Turned off breaker but no help. Now when I push the clean or bake or broil buttons, display reads "off" but no error messages- just"off" any advice?

Stove was on but not self-cleaning. We may have hit the "clean" button by mistake.
BUDDY76  
#4 Posted : Friday, April 18, 2008 3:59:03 AM(UTC)
BUDDY76

Rank: Member

Groups: Registered
Joined: 4/15/2008(UTC)
Posts: 3

Oven was in use but not in clean mode when it locked. We may have hit the clean button by mistake
glen65  
#5 Posted : Friday, April 18, 2008 9:22:30 AM(UTC)
glen65

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/31/2008(UTC)
Posts: 322

Doing some troubleshooting would be the only
way to know for sure, there are various possibilities.

According to the parts diagram,
The door is locked by a rod that goes from the
front to the back of the range which is hooked
to a motor that turns it to the lock position.
Here are some possibilities.
Check the wire connections that go to the
clock and the door latch motor.

The rod could have broken loose from the motor
itself and is stuck in the lock position.

Another is that the motor went bad after going
into lock position and it wouldn’t be able to
come out of the clean position because the
motor isn’t working.

Another thing to check it
to see if voltage is actually being sent to the
latch motor when switching from the off
position to the clean cycle and vice versa.
One posible cause could be the clock itself.
Users browsing this topic
Guest (5)
Similar Topics
Maytag wall oven door won't unlock (Oven Repair (including Ranges and Cooktops))
by Guest 9/13/2022 10:44:59 AM(UTC)
Oven Door Won't Unlock after Self-Clean (Oven Repair (including Ranges and Cooktops))
by mmriowa 3/21/2012 10:45:47 AM(UTC)
GE Oven door won't unlock after self clean (Oven Repair (including Ranges and Cooktops))
by yeller123 1/6/2009 6:19:51 AM(UTC)
oven door won't unlock (Oven Repair (including Ranges and Cooktops))
by drew11201 9/24/2008 5:03:46 PM(UTC)
Oven door won't unlock (Oven Repair (including Ranges and Cooktops))
by jenga314 8/12/2008 2:12:03 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.