Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

18 Pages«<15161718>
Options
Go to last post Go to first unread
gteasley  
#161 Posted : Thursday, April 21, 2016 8:49:18 AM(UTC)
gteasley

Rank: Member

Groups: Registered
Joined: 4/21/2016(UTC)
Posts: 1

Does anyone know about a bosh model # shx46a It will not drain. Can I test for this before ordering parts
bcollinge  
#162 Posted : Friday, March 24, 2017 8:47:56 AM(UTC)
bcollinge

Rank: Member

Groups: Registered
Joined: 3/24/2017(UTC)
Posts: 1

This is great, thanks!
jamesgluten  
#163 Posted : Monday, April 10, 2017 9:51:20 PM(UTC)
jamesgluten

Rank: Member

Groups: Registered
Joined: 4/10/2017(UTC)
Posts: 1

Hey, i see you are facing a lot of problem due to your dishwasher..Well i have the solution to your problem i found this link on internet..really a helping article Bosch Dishwasher Error Codes: E15, E22, E01, E09 | Error Codes Pro . You can find your solution here.
kli  
#164 Posted : Tuesday, April 11, 2017 10:09:04 PM(UTC)
kli

Rank: Member

Groups: Registered
Joined: 4/10/2017(UTC)
Posts: 6

Originally Posted by: jeremydfaust Go to Quoted Post
Hi, Thanks for the info. My 2006 SHE45 had the heater prong burnt out in the control module as did most of the models in this thread. I'd like to report that all is working great with the rather quick and painless repair.

Thanks again.

Burnt in Buffalo

I'm having a similar issue with my she45m05uc/50. Based on the symptoms (abnormally long runs, lukewarm wash etc) it seems like it could be a burnt out solder joint connection. Unfortunately I got as far as the control panel cover. I was able to partially open it, but the design is different than what is mentioned in this thread and in the guide i followed below. One side of it doesn't even appear to be able to open despite the back being hinged. I'm afraid of using any more force than I already have for fear of breaking the cover.

Through the portion i was able to open, i was able to view most of the board. As far as I could tell, I couldn't see any damaged connections. However, I can't be 100% certain. Does anyone have any advice on how to open my particular model's cover? Or thoughts on possible other causes of what is happening?

Thanks,
Kelvin

Oh, also the Error Code I get when hitting the 2 mode buttons + Power is: C6
I haven't come across what that means.

Bosch SHU43 Dishwasher Repair - Dishwasher keeps running (Stuff)
Gene  
#165 Posted : Wednesday, April 12, 2017 7:57:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Very likely you would need to remove the outer door panel fist. Try to follow the instructions from attached file.
File Attachment(s):
How to replace control module.doc (130kb) downloaded 9 time(s).

You cannot view/download attachments. Try to login or register.
kli  
#166 Posted : Thursday, April 13, 2017 8:16:15 AM(UTC)
kli

Rank: Member

Groups: Registered
Joined: 4/10/2017(UTC)
Posts: 6

Originally Posted by: Gene Go to Quoted Post
Very likely you would need to remove the outer door panel fist. Try to follow the instructions from attached file.

Hi Gene -

Thanks for the reply!

I actually did remove the outer door panel as well as separating the fascia console from the frame. However I there were no tabs as far as I could tell that would allow me to separate the control module from the frame. And I was unable to open the control module cover completely, as one side of it didn't even appear to have an opening all the way around.

I will try to post some pictures when I get home tonight.

Any thoughts on what the code C6 means?
kli  
#167 Posted : Monday, April 24, 2017 2:09:33 PM(UTC)
kli

Rank: Member

Groups: Registered
Joined: 4/10/2017(UTC)
Posts: 6

Here are the pics of my washer's control module cover. I can't figure out how to get it open, as mentioned:

Originally Posted by: kli Go to Quoted Post
Hi Gene -

Thanks for the reply!

I actually did remove the outer door panel as well as separating the fascia console from the frame. However I there were no tabs as far as I could tell that would allow me to separate the control module from the frame. And I was unable to open the control module cover completely, as one side of it didn't even appear to have an opening all the way around.

I will try to post some pictures when I get home tonight.

Any thoughts on what the code C6 means?
kli attached the following image(s):
IMG_8864.JPG (128kb) downloaded 34 time(s).
IMG_8150.JPG (110kb) downloaded 33 time(s).
IMG_1700.JPG (112kb) downloaded 33 time(s).

You cannot view/download attachments. Try to login or register.
Gene  
#168 Posted : Monday, April 24, 2017 3:25:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

How does it look from the other side of the metal panel?
kli  
#169 Posted : Thursday, April 27, 2017 7:39:21 AM(UTC)
kli

Rank: Member

Groups: Registered
Joined: 4/10/2017(UTC)
Posts: 6

Here are the pics

Originally Posted by: Gene Go to Quoted Post
How does it look from the other side of the metal panel?
kli attached the following image(s):
IMG_8113.JPG (112kb) downloaded 34 time(s).
IMG_8315.JPG (69kb) downloaded 34 time(s).
IMG_8316.JPG (109kb) downloaded 33 time(s).
IMG_8317.JPG (65kb) downloaded 33 time(s).

You cannot view/download attachments. Try to login or register.
kli  
#170 Posted : Thursday, April 27, 2017 7:40:53 AM(UTC)
kli

Rank: Member

Groups: Registered
Joined: 4/10/2017(UTC)
Posts: 6

Hm... after staring at the pics now, I just noticed that maybe i can push the tabs in from the left side to release it thru the opening?

Originally Posted by: kli Go to Quoted Post
Here are the pics
Users browsing this topic
18 Pages«<15161718>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.