Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
vpolitano  
#1 Posted : Monday, January 18, 2010 9:37:23 PM(UTC)
vpolitano

Rank: Member

Groups: Registered
Joined: 1/18/2010(UTC)
Posts: 2

Having an issue with our maytag Dryer, It's been working fine, this past weekend i needed to change the 2 rollers and belt. All went fine, but soon noticed that the cloths where taking to long to dry. Took the front panel off and noticed that when the dryer is started, within 30 seconds the ignitor glows bright orange, within 15 - 20 seconds gas fires and the flame comes on, as soon as that occurs i can see the ignitor starting to go dim, then within seconds the flame goes out. Eventually in about 15 - 20 seconds i hear a click, the shortly afterwards it cycles again, ignitor, flame and all goes out starting with the igniitor diming.

I suspect the coil valves, though the flame and Hi-temp could be suspect also i am thinking, any suggestions or thoughts on what this could be ?

thanks in advance
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jvbrooks  
#2 Posted : Saturday, February 6, 2010 10:25:10 AM(UTC)
jvbrooks

Rank: Member

Groups: Registered
Joined: 2/6/2010(UTC)
Posts: 1

Hi,
I'm having the same issue with my Maytag LDG712, did anyone reply to the cause and/or offer a soution.
Thanks,
Jason
vpolitano  
#3 Posted : Thursday, February 11, 2010 7:16:49 PM(UTC)
vpolitano

Rank: Member

Groups: Registered
Joined: 1/18/2010(UTC)
Posts: 2

Hi Jason,

I never did recieve a reply, but i did change out the gas valve solenoid coils and that fixed it.

Good luck

vito
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.