Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
sully  
#1 Posted : Thursday, March 27, 2008 5:41:33 PM(UTC)
sully

Rank: Member

Groups: Registered
Joined: 3/27/2008(UTC)
Posts: 1

My dryer was running for three hours blowing cold air. I figured out that my thermo fuse broke- I replaced it. It heat up again but seems very hot. I put a load in for 30 min. But it keeps on going and seems too hot. The vent is clear, Could it be the thermal high limit thermostat control? help?
Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fixtec90  
#2 Posted : Friday, March 28, 2008 5:39:39 AM(UTC)
fixtec90

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/26/2008(UTC)
Posts: 69

Did you clean your vent when you changed the t-fuse especially the point where it exits the house? If you're positive it's clear one of the t-stats is bad. The cycling t-stat is the normal culprit, but I'm not sure if your gas dryer has that type of t-stat. If not I'd suspect the hi-limit, but would need a wiring diagram before I'd put any money on the diagnosis.
Users browsing this topic
Guest (2)
Similar Topics
dryer is too hot! (Dryer Repair)
by lokahiboy 7/20/2011 4:39:50 PM(UTC)
Dryer is too hot on all settings (Dryer Repair)
by klray 6/24/2011 5:09:49 AM(UTC)
Dryer is too hot (Dryer Repair)
by gramparon 1/19/2011 4:16:24 PM(UTC)
Dryer is too Hot (Dryer Repair)
by wrkeels@comcast.net 7/19/2009 2:01:13 PM(UTC)
dryer is too hot (Dryer Repair)
by 12wireless 1/7/2008 6:55:10 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.