Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mtroegel  
#1 Posted : Thursday, March 27, 2008 12:24:55 PM(UTC)
mtroegel

Rank: Member

Groups: Registered
Joined: 3/27/2008(UTC)
Posts: 3

How do you replace the board that controls the clock and oven at the top.:)
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, March 27, 2008 12:36:00 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Before we proceed I would like to know what is the original problem with your range.

Gene.
mtroegel  
#3 Posted : Sunday, March 30, 2008 9:38:24 AM(UTC)
mtroegel

Rank: Member

Groups: Registered
Joined: 3/27/2008(UTC)
Posts: 3

This just started,but I have found that every time I turn the tv on the clock on the oven either starts blinking or trys to go out. And you also can't use the oven when this is going on. I have been through this about 25 times but every time the t.v. is turned on the clock goes acting up. I have even tried turning the t.v. on without a remote but the same problem . And also, the oven is on it's on power wired to it's on electic box outside. SO CAN YOU PLEASE TELL ME WHAT THIS IS!!!!!!!!!!!!!!!!!!!! P.S. This sounds like:eek: something Rod Stirling would have in the TWLIGHT ZONE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:mad::mad::eek::eek:
Gene  
#4 Posted : Monday, March 31, 2008 9:28:39 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I do not think there is a problem with the oven control board.

Most likely something is wrong with power supply for the oven and/or TV. You have to call a certified electrician to check the breaker box and the outlets inside.

Gene.
mtroegel  
#5 Posted : Tuesday, April 1, 2008 9:46:23 PM(UTC)
mtroegel

Rank: Member

Groups: Registered
Joined: 3/27/2008(UTC)
Posts: 3

Thankyou, Iguess I will have to do that.
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.