Rank: Member
Groups: Registered
Joined: 12/24/2009(UTC) Posts: 6
|
After re-seating the connector on the timer, things have changed. The agitator no longer runs as soon as I close the lid, and I am not spraying water during the spin cycle anymore. I will have to look more at this tomorrow, but maybe some of the timer badness has went away.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC) Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
If you have "normal" strength in your hand, you probably have a slipping clutch and dragging brake shoes. Hard to verify this with an amprobe as the newer clutches are much weaker with 1/2 the amont of friction pads. Pull the tranny. If you can turn the clutch rather easily in the clutch housing, you have a bad clutch. Repair or order a new one.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close