Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
fbaldwin  
#1 Posted : Tuesday, March 11, 2008 5:50:12 PM(UTC)
fbaldwin

Rank: Member

Groups: Registered
Joined: 3/11/2008(UTC)
Posts: 2

The oven will not heat. The ingitor glows bright but the gas never turns "on". I replaced the bake valve but still same problem. I reinstalled the wires (red and white) back to the same location when replacing the valve.

I made a mistake when removing the bake valve, I forgot to turn the gas valve off at the wall outlet. I observed the gas spraying out and turned the valve off. Does this stove have a safety valve near the top of stove that could have shut the gas off?

I don't understand when the bake valve will open?

serial 33744157SY
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
misterfixall  
#2 Posted : Tuesday, March 11, 2008 6:19:06 PM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622

you should not be repairing anything that involves opening a gas component unless you have a gas fitters license .people have died doing that.restricting your self to an electrical component that does not involve opening a gas line is alright, other than that you may need a new ignitor ignitor
fbaldwin  
#3 Posted : Wednesday, March 12, 2008 4:25:11 PM(UTC)
fbaldwin

Rank: Member

Groups: Registered
Joined: 3/11/2008(UTC)
Posts: 2

California does not require a "pipe fitters" license to repair stoves. In fact, I don't think that any State Gov't agency offers a "pipe fitters" license.
Gene  
#4 Posted : Thursday, March 13, 2008 12:38:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I absolutely agree with misterfixall - the problem is a bad igniter.

- The part number for the oven igniter is AP205873

Here are the break down diagrams for the Magic Chef range Model 31001SAW

Gene.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.