Rank: Member
Groups: Registered
Joined: 11/21/2009(UTC)
Posts: 3
|
Just realize that the Left front and Left rear surface surface element are not working.
The oven (bake and broil are fine) and the Right front and rear surface elements are working good too.
It is thanksgiving party tomorrow and i have only half of the electric surface heating burners working
:( what do i do ? i open the back of the range and visually the connections look to be fine.
The electric range is about 1.5 years old
any help/suggestion greatly appreciated...thank you
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/21/2009(UTC)
Posts: 3
|
hi...any suggestion ?
It is the cooktop surface element (burner) - the left side not working.
If there is a reset or something i can do immediately..pls help.
Thanksgiving party is tonite.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/21/2009(UTC)
Posts: 3
|
sorry, any suggestions ?
This is a ceramic glass cooking surface. If the left side heating element is not working (right is fine), there is probably a switch or receptable that i can order and replace ?
Thanks much for help....
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
Here is a wiring diagram http://manuals.frigidaire.com/p...ingfield/316441485en.pdfSounds like a wire may have burned off or a track on the relay board. Unplug the unit and check the wiring. Also check the track on the relay board going to P7. Sorry I could not find any more info on this unit. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
