Rank: Member
Groups: Registered
Joined: 6/1/2010(UTC) Posts: 4
|
Hello All, If you have experienced a dishwasher fire or near fire, please have a look at the following website and add your model and serial number with a description of what happened. Perhaps we can gather enough cases to generate a recall, lawsuit or class action suit against Whirlpool. The website was created by a home owner Steve Chamber, that this also happened to. KitchenAid Dishwasher Fire | KitchenAidFire.com | Unsafe Consumer Product | Whirlpool Needs Recall | Please take the 10 mins. to fill in your info, who knows where it could lead. May be it will save just one life and even get us reimbursed for our losses. I have a Kenmore Elite Dishwasher that nearly burst into flames on May 29th 2010 at 10:00pm. Luckily I discovered the smell and smoke before I went to bed. My model is 665.16279400, purchased in Nov. 2004. Circuit board burnt both knife connectors right off the board and melted a hole in the plastic case that holds the board. It also started to over heat the wiring and melt the casings of the wires. Thanks Gary
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/1/2010(UTC) Posts: 4
|
Hello All, If you have experienced a dishwasher fire or near fire, please have a look at the following website and add your model and serial number with a description of what happened. Perhaps we can gather enough cases to generate a recall, lawsuit or class action suit against Whirlpool. The website was created by a home owner Steve Chamber, that this also happened to. KitchenAid Dishwasher Fire | KitchenAidFire.com | Unsafe Consumer Product | Whirlpool Needs Recall | Please take the 10 mins. to fill in your info, who knows where it could lead. May be it will save just one life and even get us reimbursed for our losses. I have a Kenmore Elite Dishwasher that nearly burst into flames on May 29th at 10:00pm. Luckily I discovered the smell and smoke before I went to bed. My model is 665.16279400, purchased in Nov. 2004. Circuit board burnt both knife connectors right off the board and melted a hole in the plastic case that holds the board. It also started to over heat the wiring and melt the casings of the wires. Thanks Gary
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/2/2010(UTC) Posts: 1
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/1/2010(UTC) Posts: 4
|
What is it your asking le45is?
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close