Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



New Topic Post Reply
Go to last post Go to first unread
Matthew Schug  
#1 Posted : Wednesday, September 21, 2022 8:11:23 PM(UTC)
Matthew Schug

Rank: Member

Groups: Registered
Joined: 9/21/2022(UTC)
Posts: 0
United States
Location: CA

I have Samsung Model WF45H6300AW/A2 washer. The rotor was separating from the center hub. I replaced it and when doing the spin test, it cycles back and forth really fast and then set the 3E3 code. The drum is tight no bearing problem and the drum rotates freely. When putting it in service mode I can count the drum rotation as I turn it by hand. Anything else I should check?
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.