Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Saturday, July 18, 2020 7:28:59 AM(UTC)

Rank: Member

Groups: Registered
Joined: 7/18/2020(UTC)
Posts: 0
United States
Location: Hot Springs SD

Our Samsung was in storage for one year, after setting up and leveling the dryer worked great for 5-6 loads. At the end of the 7th load the dryer would not start and the display is blank.

Found your site and the highest percentage repair was replacing the Thermal Fuse. After replacing no change. Doing T&D I have tested [OHM] all switches, fuses and heating element, no issues. Checked power to dryer, good. I am unable, to test the control this a symptom of the control panel [AP5916791] malfunctioning?

It seems that most other failures, i.e. motor, don't stop the control panel to display...

I know troubleshooting over an email is next to impossible but what component would fail that would cause no more display? How to test?

Please over assistance. Thanks

See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.