Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Monday, October 7, 2019 3:46:10 PM(UTC)

Rank: Member

Groups: Registered
Joined: 10/7/2019(UTC)
Posts: 0
United States
Location: Georgia

LG washer model WM2301HR. Would not power on, so figured the main power board was bad. Dropped in a new board, still nothing. Started poking around electrical stuff and found this "noise filter" with a PCB and a fuse. Replaced it with a new one and the machine came on!

Put old control board back power. The machine will only work with the new control board AND the new noise filter.

So I figure this noise filter is some kind of surge protector for the control board, but it it weird that they both needed replacing at the same time?

See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.