Rank: Member
Groups: Registered
Joined: 4/27/2019(UTC) Posts: 0  Location: Texas
|
When I press the start button it flashes along with 3 beeps. From what I have found this is a door issue problem. I replaced the door switch, but I have the same issue. I disconnected the power, waited overnight to see if the error would stop. It did not. Not sure what my next step is. Any assistance would be appreciated.
Thanks,
Mitchell
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/18/2019(UTC) Posts: 0 Location: nevada
|
I also have the same problem with starting my GE dishwasher. Quit starting up after power outage. Tried resetting it by leaving it off for an hour, but when I would try to start the cycle, instrument panel would acknowledge everything I wanted to do but when I pushed the start, I waited a few seconds for it to start but then I would get the 3 beeps all over again. Becoming frustrated not knowing which "PART" to replace. If anyone has help, please don't hesitate to offer. Thanks, Tim
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
