Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Tuesday, March 19, 2019 7:14:48 AM(UTC)

Rank: Member

Groups: Registered
Joined: 3/19/2019(UTC)
Posts: 0
United States
Location: florida

I have a Jenn-Air JDB1105AWS - it won't start from the start button.

This has happened a couple times in the past 10 years, each time unplugging the unit and plugging it back in fixed it. Maybe 3 times it's occurred, each time after a brown out.

This time it didn't reset. I tried the various button combinations that are supposed to reset it (some of which seem to initiate a short cycle on the washer). Nothing worked.

Initially I suspected based on the various messages around that the control panel needed to be replaced. BUT....
I discovered that if I faked the unit into thinking the door was closed by shoving a binder clip into the door latch receiver, the buttons worked and I could initiate a cycle. If I pulled the binder clip out it thought I just momentarily opened the door and paused the cycle, and resumed when I closed the door.

So based on that I replaced the door latch receiver plus micro switches...

And the unit continues the same behavior. Is it likely the more expensive control panel? Could it be something else at this point?


Edited by user Tuesday, March 19, 2019 7:15:48 AM(UTC)  | Reason: Not specified

See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.