Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Pmp816  
#1 Posted : Sunday, February 3, 2019 6:58:39 AM(UTC)
Pmp816

Rank: Member

Groups: Registered
Joined: 2/3/2019(UTC)
Posts: 0
United States
Location: Las Vegas

I tested the heating element, thermostat, hi limit thermostat and the thermistor and all are working. The flow chart says to "measure the voltage drop between the two terminals of RL 2. If reading is 240 then to replace the control board. If reading is 0 then to continue on with trouble shooting." When I measured the drop I got a reading of 70. It is not 240, and also not 0 so I am not sure what to do from there? Thank you in advance!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.