Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
agt24  
#1 Posted : Thursday, January 24, 2019 5:56:09 PM(UTC)
agt24

Rank: Member

Groups: Registered
Joined: 1/24/2019(UTC)
Posts: 0
United States

I have GE Dryer (DBVH512EFWW) that intermittently will not engage the tumble motor -- usually after a few loads have been run. It appears to be some kind of overheating but I'm not clear how to resolve it.

When this last occurred, I entered diagnostic mode and ran all diagnostics as per the service manual
https://www.applianceblo...als/31-9136_GEFDryer.pdf

The results were as follows:

t01 = 02
t02 = E00
t03 = 045
t04 = EPP
t05 = all LEDs light
t06 = beep
t07 = Drum does not rotate, 073 temperature displayed
t08 = Drum does not rotate, 123 temperature displayed
t09 = 2.00
t10 = HI

I have replaced the thermostat, but this did not resolve the problem:
https://www.appliancepar...-shuts-off-too-soon.html

I'd welcome any advice on how to resolve the issue.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
agt24  
#2 Posted : Saturday, April 20, 2019 5:22:59 AM(UTC)
agt24

Rank: Member

Groups: Registered
Joined: 1/24/2019(UTC)
Posts: 0
United States

After a lot of trial and error, this dryer is now fixed. Ultimately we replaced the Dryer Control Board (Part # WE4M331). I bought the replacement board off Ebay. More info here:
http://www.fixya.com/sup...ntermittently_will?mt_f=
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.